Home ReviewsRefund Car not listed?
Home/Audi/A8/Audi A8 D3 facelift (2005-2007)/Repair manual/Suspension, Wheels and Steering/Control Position, Programming
Contents Wiring diagrams Section: Suspension, Wheels and Steering All sections

Control Position, Programming Audi A8 D3 facelift

Suspension, Wheels and Steering

Control Position, Programming

  1. Connect VAS 5051 A and select function test using "Functions/Component selection" --> VAS 5051A, Connecting and Selecting Functions .

Then

  1. "J197 - Level control system control module functions".
  2. "J197 - Re-adapting control position".

Note. If the control position was programmed on vehicles with lane assist, the directional stabilization assistance control module J759 with integrated camera must be calibrated --> Calibration Procedure .