Home ReviewsRefund Car not listed?
Home/Audi/A8/Audi A8 D2 facelift (1999-2002)/Repair manual/Gauges & Instrument Panels/Interior Equipment: Overview
Contents Wiring diagrams Section: Gauges & Instrument Panels All sections

Interior Equipment: Overview Audi A8 D2 facelift

Gauges & Instrument Panels ~320 words

Trim for steering column switch, overview

Note. The following list refers to (Схема №9).

  1. Gap cover, lower
  2. Trim, lower Up to m.y. 06.97
  3. Phillips-head screw 0.6 Nm (5 in.lb.) 2 parts
  4. Trim upper
  5. Switch for steering column adjustment -E167- Only for power adjustable steering column
  6. Phillips-head screw 0.6 Nm (5 in.lb.) For trim, lower, up to m.y. 06.97
  7. Countersunk screw 0.3 Nm (3 in. lb.) 2 parts
  8. Phillips-head screw 0.6 Nm (5 in. lb.) 2 parts
  9. Oval head screw 3 Nm (27 in. lb.) 2 parts Only for mechanically adjustable steering column
  10. Handle for steering column adjustment
  11. Hex socket bolt 2.5 Nm (22 in.lb.)

Center console, overview

Note. The following list refers to (Схема №13).

  1. Left trim for center console
  2. Hex bolt 2.5 Nm (22 in.lb.)
  3. Phillips-head screw 2.5 Nm (22 in.lb.)
  4. Hex socket bolt 2.5 Nm (22 in.lb.) 2 parts
  5. Ashtray
  6. Hex socket bolt 2.5 Nm (22 in.lb.) 4 parts
  7. Instrument cluster, center part Removing and installing. See «INSTRUMENT PANEL (CENTER), ASSEMBLY»(ref-196886-S27455000122005101000000).
  8. Hex socket bolt 2.5 Nm (22 in.lb.)
  9. Cover
  10. Locking screw 1 Nm (8 in.lb.) Loosen to adjust parking brake cover
  11. Parking brake lever handle Removing Pry out lock pin at underside. Remove parking brake lever from front
  12. Washer For lock pin
  13. Trim For parking brake After loosening, lock pin is adjustable both longitudinally and in cross direction. See REMOVING . Turn locking screw (item -10-) approx. 2 revolutions to loosen Remove trim from front.
  14. Trim parking brake Insert retaining pin of trim in hole at parking brake lever.
  15. Outlet rear seat area
  16. Trim For outlet rear seat Unclip to remove
  17. Phillips-head screw 1.5 Nm (13 in.lb.) 2 parts
  18. Hex socket bolt 2.5 Nm (22 in.lb.) 2 parts
  19. Center console Removing and installing. See «CENTER CONSOLE, REMOVING AND INSTALLING»(ref-196886-S31249859362005101000000).
  20. Hex socket bolt 2.5 Nm (22 in.lb.) 2 parts
  21. Hex socket bolt 2.5 Nm (22 in.lb.) 2 parts

More articles — Interior Equipment