Interior Trim: Overhaul Audi A6 C5 facelift

Hinged pocket assembly, removing and installing

1. Remove door trim. See «FRONT DOOR TRIM, REMOVING AND INSTALLING»(ref-196286-S04563219522005100800000) .
2. Remove insulation. See «FRONT DOOR TRIM INSULATION, REMOVING AND INSTALLING»(ref-196286-S00067003462005100800000) .
3. Remove screws -1- (6x).

1. Remove door trim. See «REAR DOOR TRIM, REMOVING AND INSTALLING»(ref-196286-S30740546102005100800000) .
2. Remove insulation. See «REAR DOOR TRIM INSULATION, REMOVING AND INSTALLING»(ref-196286-S10590744792005100800000) .
3. Remove screws -1- (4x).

Scheme 2

1. Remove door trim. See «REAR DOOR TRIM, REMOVING AND INSTALLING»(ref-196286-S30740546102005100800000).
2. Remove hinged pocket assembly. See «HINGED POCKET ASSEMBLY, REMOVING AND INSTALLING»(ref-196286-S14607409292005100800000).
3. Detach spring -1- from guide -2-.
4. Detach spring -1- from guide -2-.
5. Use screwdriver to press pin -1- outward as far as it will go.
6. Use long-nose pliers to pull out pin -1-.
7. Use screwdriver to press pin -1- outward as far as it will go.
8. Use long needle-nose pliers to pull out pin -1-.
9. Use screwdriver to pry out guide pins -1- on left and right. see scheme 54
10. Remove hinged pocket from mount. Installing
11. When installing, engage gear wheel -1- in gear track -2-.