Removing and installing Audi A4 B6

Removing and installing

Special tools, testers and auxiliary items required

Scheme 141

1. Torque wrench V.A.G 1332

Scheme 142

1. Torque wrench V.A.G 1410

When removing and installing control arm, it is necessary to loosen Left Front Level Control System Sensor G78 retaining clip.

Note. To install connecting link to Left Front Level Control System Sensor G78 crank, use an open-end wrench (wrench width 10) with dimension - A - = 4 mm to avoid damaging the seal.

Scheme 143

1. Dimension - A - = 4 mm
2. Mount wheel and tighten. This information is contained in AESIS; Library; Additional Information; Wheels and Tire Guide
3. Left Front Level Control System Sensor G78 connecting link retaining clip is secured at control arm between stops with a clamp.

When installing headlight range control, ensure correct position of crank and connecting link to each other.

Note. Connecting link must face forward diagonally. Crank must face rearward.