Home/Audi/A4/Audi A4 B6 (2000-2006)/Repair manual/Continuously Variable Transmission (cvt) 01j/Hydraulic control module, removing and installing

Contents

Wiring diagrams Section: Continuously Variable Transmission (cvt) 01j

Transmission identification

Code letters, assembly allocation, ratios, equipment

Capacities

Towing instructions

Repair instructions

Contact corrosion!

General Repair Notes

Rules for cleanliness when working on transmission

Shift mechanism (through VIN 8E_6A156499), servicing

Shift mechanism (through VIN 8E_6A156499), checking

Selector mechanism function test

Check ignition key withdrawal lock

Check locking button on selector lever handle

Shift mechanism, through VIN 8E_6A156499, removing and installing

Selector lever handle, shift mechanism cover (through VIN 8E_6A156499), assembly overview

Selector lever handle (through VIN 8E_6A156499), removing and installing

Shift mechanism cover (through VIN 8E_6A156499), removing and installing

Tiptronic Switch F189 (through VIN 8E_6A156499), removing and installing

Shift mechanism (through VIN 8E_6A156499,), assembly overview

Shift mechanism (through VIN 8E_6A156499), disassembling and assembling

Shift Lock Solenoid N110 (through VIN 8E_6A156499), removing and installing

Selector lever cable and locking cable (through VIN 8E_6A156499), assembly overview

Selector lever cable, (through VIN 8E_6A156499), removing and installing

Selector lever cable (through VIN 8E_6A156499), adjusting

Selector lever cable (VIN through 8E_6A156499), bringing into basic setting

Locking lever (through VIN 8E_6A156499), adjusting

Shift mechanism (from VIN 8E_6A156500), servicing

Shift mechanism (from VIN 8E_6A156500), checking

Selector lever handle, shift mechanism cover (from VIN 8E_6A156500), assembly overview

Selector lever handle (from VIN 8E_6A156500), removing and installing

Shift mechanism cover (from VIN 8E_6A156500), removing and installing

Tiptronic Switch F189 (from VIN 8E_6A156500), removing and installing

Shift mechanism (from VIN 8E_6A156500), assembly overview

Shift mechanism (from VIN 8E_6A156500), removing and installing

Selector lever cable and locking cable (from VIN 8E_6A156500), assembly overview

Selector lever cable (from VIN 8E_6A156500), removing and installing

Selector lever cable (from VIN 8E_6A156500), adjusting

Selector lever cable, from VIN 8E_6A156500), bringing into basic setting

Locking lever (from VIN 8E_6A156500), removing and installing

Locking cable (from VIN 8E_6A156500), adjusting

Transmission, removing and installing

Transmission (vehicles with 2.0 L normally-aspirated engine, also Audi Cabriolet), removing

Transmission (vehicles with 2.0 L TFSI engine, also Audi Cabriolet), removing

Transmission (vehicles with 6-cyl. 3.0 L gasoline engine, also Audi Cabriolet), removing

Transmission (vehicles with 6-cyl. 3.2 L FSI gasoline engine, also Audi Cabriolet), removing

Installing transmission

Securing engine/transmission (transmission flange pattern)

Automatic transmission, transporting

Transmission mount, transmission support and tunnel cross member, removing and installing

ATF in planetary gearing

ATF level, checking and topping off

Filling ATF

ATF, changing or filling after repairs

ATF lines, ATF cooler and auxiliary ATF filter, servicing

ATF lines, ATF cooler and auxiliary ATF filter (vehicles with 1.8 L turbo engine)

ATF lines and ATF cooler, cleaning

Additional ATF filter

Auxiliary ATF filter, removing and installing (vehicles with 1.8 turbo and 2.0 L TFSI)

Auxiliary ATF filter, removing and installing (vehicles with 2.0 L normally aspirated- and 6-cyl. gasoline engine)

ATF breather pipe

ATF breather pipe, removing and installing

Torque specifications

Transmission Control Module (TCM) J217 , removing and installing

Selector shaft, cleaning

Hydraulic control module, removing and installing

Input shaft, removing and installing

Input shaft, servicing

Gear oil in front final drive

Gear oil level in front final drive, checking

Front final drive, servicing

Left flange shaft, removing and installing

Right flange shaft, removing and installing

Left flange shaft oil seal, replacing

Input shaft seal, replacing

Selector shaft oil seal, replacing

All sections

Hydraulic control module, removing and installing Audi A4 B6

Continuously Variable Transmission (cvt) 01j

Hydraulic control module, removing and installing

Note. Rules of cleanliness for working on automatic transmissions --> Rules for cleanliness when working on transmission . General repair notes --> Repair instructions . Always replace hydraulic control assembly if it has collected dirt or if it is defective.

Remove end cover --> «End cover, removing and installing»(/audi/a4/b6-2000-2006/remont/differentials-drive-axles/#continuously-variable-transmission-cvt-01j) .

The corresponding description for removal and installation of the hydraulic control unit can be found in --> 38 - AUTOMATIC TRANSMISSION - GEARS, HYDRAULIC CONTROLS .

CAUTION

The hydraulic control assembly must not under any circumstances be supported on the long pump shaft on the back side or raised up. Otherwise, the blades inside the vane pump will be crushed and the pump damaged.