Tower "II" , disassembling Audi A4 B6

Tower "II" , disassembling

1. If not carried out yet, remove adjustment shim - 2 - from clutch "B" - 1 -.

Scheme 1157

1. Remove clutch "B" - 3 - and axial needle bearing - 2 - from clutch "A" - 1 -.

Scheme 1158

1. Remove circlip - 2 - from input shaft - 1 -.

Scheme 1159

1. Place clutch "A" - 1 - with outer edges on 2 wood blocks, approx. 40 mm high.
2. Tap on input shaft - 2 - with clutch "E" using plastic hammer.
3. Remove clutch "A" from clutch "E".