CAPACITY
Hydraulic system fluid capacity is about 12-15 oz. (0.7-0.9 L).
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Flexible Hose Bolt | 30 (40) |
| Front Bumper Bolt/Washer Assembly | 17 (23) |
| Ignition Coil Bracket Bolt | 18 (25) |
| Lock Carrier Bolt | 37 (50) |
| Lower Control Arm Nut | 45 (33) |
| Return Hose Bolt | 37 (50) |
| Steering Column Nut | 30 (40) |
| Steering Damper Bolt | 26 (35) |
| Steering Gear Mounting Bolt | 48 (65) |
| Steering Pump Banjo Bolt (19 mm) | 30 (40) |
| Steering Pump Banjo Bolt (22 mm) | 37 (50) |
| Steering Pump Bracket & Mounting Bolt | 18 (25) |
| Steering Pump Line Union | 37 (50) |
| Steering Pump Pulley Bolt | 18 (25) |
| Tie Rod End Nut (2) | 37 (50) |
| Viscous Coupling (1) | 27 (37) |
| Water Pump Pulley Bolt | 18 (25) |
| Wheel Lug Bolt | 89 (120) |
| INCH Lbs. (N.m) |
| Cooling Fan-To-Viscous Coupling | 90 (10) |
| Outer Tie Rod Adjusting Bolt | 62 (7) |
| Pressure Line Bolt | 71 (8) |
| Steering Damper Nut | 90 (10) |
| Steering Gear Screw Plug | 120 (13) |
| Suction Line Bracket Bolt | 71 (8) |
| Upper Radiator Core Support Bolt | 71 (8) |
| (1) On 2.8L V6 (AHA & ATQ) engine only, using Spanner 3312 (left thread). (2) Manufacturer recomends using new self-locking nut. |
| (1) | On 2.8L V6 (AHA & ATQ) engine only, using Spanner 3312 (left thread). |
| (2) | Manufacturer recomends using new self-locking nut. |
