Repair manual
Wiring diagrams
Audi A4 B5 facelift Repair Manual
Step-by-step repair and maintenance instructions for the Audi A4 B5 facelift (1999–2001): removal, installation, adjustment, diagnostics and parameter checks with illustrations.
67sections
482articles
ENManual language
- Engine Performance Diagnostic Routine Outline - General Information
- Engine Performance Safety Precautions
- Parasitic Load Explanation & Test Procedures - General Information 2
- Waveforms - Injector Pattern Tutorial - General Information 2
- Electrostatic Discharge Warning - General Information
- State Emission Standards - Diesel
- TRANSMISSION
- HYDRAULIC CONTROL
- ROLL STARTING AND TOWING, NOTES
- AXLE SHAFTS
- TRANSMISSION COMPONENTS
- REPAIR INSTRUCTIONS
- O-RINGS, GASKETS, SEALS
- NUTS, BOLTS
- CIRCLIPS
- MOUNTS
- SHIMS
- VALVE BODY
- Removing
- Installing
- RULES OF CLEANLINESS FOR WORKING ON AUTOMATIC TRANSMISSIONS
- Driving Small Tapered Roller Bearing Outer Race Out Of Housing
- Pressing Tapered Roller Bearing Outer Race Into Housing
- Pressing On Small Tapered Roller Bearing Inner Race
- Pulling Off Large Tapered Roller Bearing Inner Race
- Pressing On Large Tapered Roller Bearing Inner Race
- Driving Large Tapered Roller Bearing Outer Race Out Of Cover
- Installing Ring Gear
- Installing Small Differential Bevel Gears
- Adjusting Differential Bevel Gears
- Removing Drive Pinion Nut
- Driving Out Large Tapered Roller Bearing Outer Race
- Pressing Large Tapered Roller Bearing Inner Race Onto Drive Pinion
- Pulling In Large Tapered Roller Bearing Outer Race
- Pressing In Small Tapered Roller Bearing Outer Race
- General Notes
- Adjusting
- Determining Shim "S3" (Drive Pinion)
- Determining Dimension "e" (Drive Pinion)
- Checking dimension "r" (Drive Pinion)
- RING GEAR, ADJUSTING
- Determining Thickness Of Shim "S1*" (Ring Gear)
- Adjusting Backlash
- Determining Average Backlash
- Determining Thickness Of Shim "S2" (Ring Gear)
- Determining Thickness Of Shim "S1" (Ring Gear)
- Checking Measurement (Ring Gear)
- REMOVAL & INSTALLATION
- Removal & Installation (A4 With 1.8L)
- Removal & Installation (A4 With 2.8L)
- Removal & Installation (S4 With 2.7L Turbo)
- Removal & Installation (Auxiliary Cooler)
- Removal & Installation (With Tiptronic Shift Mechanism)
- Removal & Installation (Concert)
- Removal & Installation (Without Tiptronic Shift Mechanism)
- Removal & Installation (With E17 Valve Body)
- Removal & Installation (With E18 Valve Body)