FASTENER TIGHTENING SPECIFICATIONS
| Component | Bolt Size | Nm |
|---|
| Air Filter Housing Lower Section | | 3 |
| Fuel Pressure Sensor | | 20 |
| Fuel Return Line to Fuel Tank |
| Tighten Connection | | 40 |
| | 25 |
| Fuel Supply Line to Fuel Rail | | 30 |
| Heat Shield | | 3 |
| High Pressure Pump | | 10 |
| Intake Air Temperature Sensor | | 5 |
| Intake Flap Motor with Intake Manifold Runner Position Sensor | | 7 |
| Intake Manifold | | 9 |
| Intake Manifold Support |
| Bolt | | 23 |
| Nut | | 10 |
| Low Fuel Pressure Sensor | | 15 |
| Mass Air Flow Sensor | | 3 |
| Oxygen Sensor | | 55 |
| Throttle Valve Control Module | | 7 |
| Turbocharger Recirculating Valve | | 7 |
| Wastegate Bypass Regulator Valve | | 3 |
