FASTENER TIGHTENING SPECIFICATIONS
| Component | Bolt Size | Nm |
|---|---|---|
| After-Run Coolant Pump bracket to bracket | 8 | |
| Bracket (2) | 5 | |
| Coolant Fan to fan shroud, Nut | 10 | |
| Connecting Piece to coolant pump | 9 | |
| Drive Gear for Toothed Belt 1 | 10 + 90° | |
| Fan Shroud to Radiator | 5 | |
| Front Coolant Pipes to engine | 5 | |
| Radiator to charge air cooler | 5 | |
| Retaining Plate to coolant pump | 4 | |
| Small Coolant Pipe to engine | 9 | |
| Toothed Belt Guard to coolant pump | 9 |
Coolant Pump Tightening Sequence
Tighten the coolant pump bolts to 9 Nm in a -1 to 5- sequence.
See also:
• Removal and Installation