Driver Position Memory System: Adjustments Acura TL IV facelift

Power Seat Adjustment Switch Test/Replacement

Note. SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ), and precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or servicing.

Scheme 118

Scheme 119

1. Remove the driver's seat (see «FRONT SEAT REMOVAL/INSTALLATION»(ref-512389-S33519388822012103100000) ).
2. Remove the power seat adjustment switch knobs (A) and the recline cover from the driver's seat (see «FRONT SEAT RECLINE COVER REMOVAL/INSTALLATION»(ref-512389-S20316829942012103100000) ), then remove the two screws and the power seat adjustment switch (B).
3. Disconnect the 12P connector from the power seat adjustment switch.
4. Reinstall the adjustment switch knobs to the switch.
5. Check for continuity between the terminals in each position according to the table.
6. If the continuity is not as specified, replace the switch.