PCV System Acura RDX I рестайлинг

Scheme 66

Scheme 67

Scheme 68

1. Check the PCV valve (A), the hoses (B), and the connections for leaks or restrictions.
2. At idle, listen to the PCV valve (A) with a stethoscope or a flat-tip screwdriver as you lightly pinch the PCV hose (B) with your fingers or pliers several times. Each time the hose is pinched, the valve should click. If there is no clicking sound, check the PCV valve washer for cracks or damage. If the washer is OK, replace the PCV valve (see «PCV VALVE REPLACEMENT»(/acura/rdx/i-2009-2012/remont/auxiliary-emission-control-systems/#pcv-system) ) and recheck.

Scheme 69

1. Disconnect the PCV hose (A).
2. Remove the PCV valve (B).
3. Install the parts in the reverse order of removal with a new washer (C).

See also:
• PCV VALVE REPLACEMENT