INSTALLING COMPONENTS Volvo XC90 I

INSTALLING COMPONENTS

1. Install the front SIPS member. Press the brake pipe into place in the member
2. Hook the rubber mounting for the three-way catalytic converter (TWC) in the bracket on the sub-frame
3. Connect the connector for the rear heated oxygen sensors (HO2S). Clamp the wiring. Tighten the screwed joint between the three-way catalytic converter (TWC) and the exhaust system. See «SUMMARY OF TIGHTENING TORQUES FOR SPECIFIC COMPONENTS»(ref-476949-S07944404162012060500000) .

Install

1. the anti-roll bar links. Use new lock nuts
2. the splash guard under the engine
3. the front protective cover on the sub-frame
4. the front wheels. See «INSTALLING WHEELS»(ref-476812-S05651003162012060500000)