Home ReviewsRefund
Home/Volvo/XC90/Volvo XC90 I (2002-2006)/Repair manual/Engine Control Systems/Ignition and Control Systems - Removal, Replacement and Ins…
Contents Wiring diagrams Section: Engine Control Systems All sections

Ignition and Control Systems - Removal, Replacement and Installation: Maintenance Volvo XC90 I

Engine Control Systems 2 illustrations

DRAINING THE FUEL SYSTEM

Drain the fuel system. See: FUEL SYSTEM, DRAINING .

Scheme 7

Scheme 7: REMOVING THE UPPER CROSS STAY
Scheme 7: REMOVING THE UPPER CROSS STAY

Remove

  1. the 4 screws at the suspension turrets
  2. the screws of the upper engine mount on the engine
  3. the upper cross stay.

Scheme 8

Scheme 8: REMOVING THE UPPER ENGINE MOUNT
Scheme 8: REMOVING THE UPPER ENGINE MOUNT

Remove

  1. the 4 screws
  2. the upper engine mount.

DRAINING COOLANT

Open the cock on the lower left edge of the radiator.

Drain the coolant into a clean receptacle.

Close the cock.

More articles — Ignition and Control Systems - Removal, Replacement and Installation