Engine Control Module (ECM) Diagnostic Trouble Codes - 3 of 8: Adjustments Volvo XC70 II

CHECKING THE CAMSHAFT ADJUSTMENT

To check the camshaft setting, go to fault tracing for DTC ECM-P001621 and follow it.

If a fault is found, rectify according to the instructions. If no fault is found, continue fault tracing for this DTC.

HINT: To check the status for engine misfiring, click the VCT2000 symbol in VIDA (Volvo scan tool). The engine must be running for the test to be performed correctly.

1. Continue Refer to «FAULT-TRACING INFORMATION»(ref-495387-S30161887642012082100000)

To check the camshaft setting, go to fault tracing for DTC ECM-P001621 and follow it.

If a fault is found, rectify according to the instructions. If no fault is found, continue fault tracing for this DTC.

HINT: To check the status for engine misfiring, click the VCT2000 symbol in VIDA (Volvo scan tool). The engine must be running for the test to be performed correctly.

1. Continue Refer to «FAULT-TRACING INFORMATION»(ref-495387-S22369764252012082100000)

To check the camshaft setting, go to fault tracing for DTC ECM-P001621 and follow it.

If a fault is found, rectify according to the instructions. If no fault is found, continue fault tracing for this DTC.

HINT: To check the status for engine misfiring, click the VCT2000 symbol in VIDA (Volvo scan tool). The engine must be running for the test to be performed correctly.

1. Continue Refer to «FAULT-TRACING INFORMATION»(ref-495387-S13645327162012082100000)

See also:
• MEASURING THE ETHANOL CONTENT
• CONNECTING THE BREAKOUT BOX
• DESCRIPTION OF STATUS IDENTIFIER
• DESCRIPTION OF COUNTER
• COMPONENT SPECIFICATIONS
• SIGNAL SPECIFICATION
• CONTENTS
• CHECKING WIRING AND TERMINALS
• SIGNAL SPECIFICATION
• CHECKING THE VOLTAGE / GROUND TERMINAL