Installing front suspension components
HINT: Applies when installing front suspension components on both sides.
Install
- a new M12 lock nut on the ball joint pinion. Counterhold the ball joint pinion while tightening so that the boot cannot turn. Tighten
- the anti-roll bar link. Use a new M10 lock nut. Counterhold the ball joint pinion while tightening so that the boot cannot turn. Tighten. See «Summary of tightening torques for specific components»(ref-431151-S28631603972011101900000) . Tighten the drive shaft screw. Counterhold using a screwdriver in the brake disc vents. Tighten. See «Summary of tightening torques for specific components»(ref-431147-S27135259592011101900000)
- the soundproofing over the drive shaft (applies to certain versions).