Installing the Backrest Volvo V70 II рестайлинг

Installing the Backrest

HINT: If both backrests have been removed, it is best to assemble 60% of the backrest first.

Install

1. the backrest
2. the mounting screw for the hinge. Tighten to 50 Nm
3. the connector for the hinge
4. mounting for the end of the seat belt. Tighten to 48 Nm
5. the side cushion. Fold down the cushion.

Scheme 354

Remove

1. the cover
2. the screw
3. Pull the guide to one side. Lift part of the panel over the guide. Slide the guide back to disconnect the other side.

Scheme 355

1. Remove the lock side piece according to «Replacing the lock side piece»(ref-406837-S29623842732011070100000)
2. Remove the spring and sleeve
3. Press the button inwards at the bottom edge
4. Lift the inner cover to remove the indicator.