Replacing the variable valve timing solenoid Volvo V70 II рестайлинг

Replacing the variable valve timing solenoid

Note. The illustrations in this service information are used for different model years and / or models. Therefore there may be some variation. However, the essential information in the illustrations is always correct.

Scheme 296

Applies only to B6xx4T

Remove the plastic pipes between the turbocharger (TC) and charge air cooler (CAC) and between the air cleaner (ACL) and the turbocharger (TC).

Put them to one side.

Slacken off the clamp for the intake manifold at the turbocharger (TC) for cylinders 1, 2 and 3. Turn the upper section of the manifold towards the firewall.

Scheme 297

Remove the upper timing belt cover.

Note. Clean the area around the variable valve timing (VVT) solenoid thoroughly to avoid contaminated oil entering the ducts / the variable valve timing (VVT) unit.

Remove

1. the connector for the check valve
2. the screws holding the valve
3. the control valve and the gasket.