Home/Volvo/V50/Volvo V50 I рестайлинг (2007-2012)/Repair manual/Headlights/Headlamp Control Module (Hcm) - Specifications, Other: Other
Contents Section: Headlights All sections

Headlamp Control Module (Hcm) - Specifications, Other: Other Volvo V50 I рестайлинг

Headlights ~343 words

POWER SUPPLY, VALUE

Measurement range 6 - 20 V.

Indicates the power supply to the headlamp control module (HCM).

The normal value when the alternator is charging: 13.0 - 14.5 V.

STEERING WHEEL ANGLE, VALUE

Measurement range: -780 to +780°.

Indicates current steering wheel angle.

The normal value when the steering wheel and front wheels point straight ahead is approx. 0°.

FRONT POSITION SENSOR, VALUE

Measurement range: 0 to +5 V.

Indicates sensor signal for front position sensor.

The normal value when the vehicle is on a flat surface and is unladen is approx. +2.5 V.

REAR POSITION SENSOR, VALUE

Measurement range: 0 to +5 V.

Indicates sensor signal for rear position sensor.

The normal value when the vehicle is on a flat surface and is unladen is approx. +2.5 V.

VOLTAGE SUPPLY, SENSOR 5 V

Voltage supply to position sensors. Normal value is +5 V.

EXPLANATION

Frozen values are parameter values that are stored when a diagnostic trouble code is generated. Not all parameters can be read out for all diagnostic trouble codes. The parameter values can only be read if they can provide additional information on the prevailing conditions when the code was generated.

ENGINE RUNNING

The status denotes whether the engine was running or not when the diagnostic trouble code was generated.

GLOBAL TIME

The value displays the time that has passed since the diagnostic trouble code (DTC) was stored.

PASSENGER COMPARTMENT TEMPERATURE, VALUE

Measurement range: -40 till +80 °C

The value indicates the passenger compartment temperature when the diagnostic trouble code was generated.

OUTSIDE TEMPERATURE, VALUE

Measurement range: -40 till +80 °C

The value indicates the outside temperature when the diagnostic trouble code was generated.

MECU POWER SUPPLY, VALUE

Measurement range: 0 - 63 V

Normal range: 12.0 - 14.5 V

The value indicates the power supply to the central electronic module (CEM) when the diagnostic trouble code was generated.

TOTAL MILEAGE

Measurement range: 0-1000000 km.

The value indicates the vehicle's total mileage when the Diagnostic Trouble Code (DTC) was generated.