Home ReviewsRefund
Home/Volvo/V50/Volvo V50 I рестайлинг (2007-2012)/Repair manual/Cooling System (Mechanical)/Cooling System - Removal, Replacement and Installation: Mai…
Contents Section: Cooling System (Mechanical) All sections

Cooling System - Removal, Replacement and Installation: Maintenance Volvo V50 I рестайлинг

Cooling System (Mechanical) 5 illustrations ~112 words

DRAINING COOLANT

Drain coolant. See COOLING SYSTEM - DRAINING, CHARGING AND BLEEDING

Scheme 1

Scheme 1: REMOVING COMPONENTS
Scheme 1: REMOVING COMPONENTS

Remove

  1. the cover for the brake control module (BCM)

Scheme 2

Scheme 2
Scheme 2
  1. the expansion tank cap

Scheme 3

Scheme 3
Scheme 3
  1. the connector for the engine cooling fan (FC)
  2. the hoses from the clips, x 2.

Only applies to vehicles with automatic transmissions

Remove the screws for the transmission's oil cooler. Place the oil cooler to one side.

Scheme 4

Scheme 4
Scheme 4

Only applies to vehicles with premair sensors

Remove the connector for the premair sensor.

Scheme 5

Scheme 5
Scheme 5

Remove

  1. the 7 x screws
  2. the splash guard under the engine.

Install a mobile jack under the radiator.

More articles — Cooling System - Removal, Replacement and Installation