ENGINE COOLANT TEMPERATURE SENSOR (ECT) (V8)
Special tools 951 2885 Sleeve (long) 19 mm Tool number: 951 2885 Tool description: Sleeve (long) 19 mm Tool boards: 20
Note. Removal steps in this procedure may contain installation details.
Perform draining. See COOLING SYSTEM - DRAINING, CHARGING AND BLEEDING
Scheme 28
Scheme 29
Torque: M6
10 Nm
Scheme 30
Scheme 31
Torque: Temperature sensor coolant
22 Nm
see 9512885
To install, reverse the removal procedure.
Note. Removal steps in this procedure may contain installation details.
Remove fuel tank. See FUEL TANK under FUEL TANK, FUEL LINES, EVAPORATOR SYSTEM
Scheme 32
Torque: M6
10 Nm
To install, reverse the removal procedure.
Note. Removal steps in this procedure may contain installation details.
Remove fuel tank. See FUEL TANK under FUEL TANK, FUEL LINES, EVAPORATOR SYSTEM
Torque: M6
10 Nm
To install, reverse the removal procedure.
Note. Removal steps in this procedure may contain installation details.
Perform draining. See FUEL TANK DRAINING
Perform draining. See FUEL SYSTEM PRESSURE RELEASE
Battery, disconnection. See BATTERY DISCONNECTING AND CONNECTING
Remove the front muffler. See MUFFLER, FRONT
Scheme 33
Remove the propeller shaft. See PROPELLER SHAFT
Scheme 34
Torque: M8
24 Nm
Scheme 35
Scheme 36
Scheme 37
| WARNING | Fuel may still be present in the fuel tank after draining. |
| WARNING | Be prepared to collect escaping fluid. |
Scheme 38
Scheme 39
Torque: M8
24 Nm
Scheme 40
Note. Make sure that no components catch.
To install, reverse the removal procedure.
Note. Removal steps in this procedure may contain installation details.
Scheme 41
Scheme 42
Torque: M6
10 Nm
To install, reverse the removal procedure.
Note. Removal steps in this procedure may contain installation details.
Scheme 43
Torque: M6
10 Nm
Scheme 44
Scheme 45
Scheme 46
Torque: M6
10 Nm
Scheme 47
To install, reverse the removal procedure.
Note. Removal steps in this procedure may contain installation details.
Remove ignition coil. See REMOVAL
Scheme 48
Torque: Spark plug
25 Nm
Torque: Spark plug
28 Nm
To install, reverse the removal procedure.
Note. Removal steps in this procedure may contain installation details.
Remove ignition coil. See REMOVAL
Scheme 49
Torque: Spark plug
25 Nm
Scheme 50
Torque: Spark plug
25 Nm
To install, reverse the removal procedure.
Note. Removal steps in this procedure may contain installation details.
Scheme 51
Torque: Knock sensor
20 Nm
Remove the following items
- See «INDUCTION PIPE»(ref-499284-S12286566062012090500000)
- See «OIL COOLER, ENGINE»(ref-499525-S32480913902012090500000)
Scheme 52
Torque: M6
10 Nm
Scheme 53
Torque: Knock sensor
20 Nm
To install, reverse the removal procedure.
Note. Removal steps in this procedure may contain installation details.
Remove intake manifold. See INDUCTION PIPE
Torque: Knock sensor
20 Nm
Remove oil cooler engine. See OIL COOLER, ENGINE
Torque: Knock sensor
20 Nm
To install, reverse the removal procedure.
Note. Removal steps in this procedure may contain installation details.
Remove intake manifold. See INDUCTION PIPE
Scheme 54
Torque: Knock sensor
20 Nm
To install, reverse the removal procedure.
Scheme 55
Scheme 56
To install, reverse the removal procedure.
Note. Removal steps in this procedure may contain installation details.
Scheme 57
Torque: M5
5 Nm
To install, reverse the removal procedure.
Note. Removal steps in this procedure may contain installation details.
Follow instructions about safety information gasoline-fuel system. See SAFETY INFORMATION GASOLINE - FUEL SYSTEM
Perform draining. See FUEL SYSTEM PRESSURE RELEASE (2007-10) or FUEL SYSTEM PRESSURE RELEASE (2011-12)
Scheme 58
Torque: M5
5 Nm
To install, reverse the removal procedure.
Note. Removal steps in this procedure may contain installation details.
Perform draining. See FUEL SYSTEM PRESSURE RELEASE
Remove the throttle body. See THROTTLE BODY
Scheme 59
Torque: M6
10 Nm
To install, reverse the removal procedure.
Remove the air filter housing. See AIR CLEANER HOUSING
Scheme 60
To install, reverse the removal procedure.