Programming Control Module
Applies to MY 2005
After downloading and configuring the control module the control module receives the vehicle configuration data from the central electronic module (CEM). This can take up to 15 seconds and during this time the SRS lamp flashes in the Driver information module (DIM). Downloading and configuration is complete when the SRS lamp stops flashing.
Note. The graphics in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the graphics is always correct.
Note. For vehicles MY -2004 see Airbag Driver's Side (SRS), Replacing (3 Spoke Steering Wheel) .
Ignition off.
Disconnect the battery negative cable. See Battery, Disconnecting.
| WARNING | For information about the handling and storage of pyrotechnical SRS components, see Handling Non-Deployed SRS-Components. |
Note. Replace the decals for the safety equipment. See Decals For Safety Equipment (North America) or Decals For Safety Equipment (rest of the world).
| WARNING | Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected, non-deployed pyrotechnical SRS component. There is a risk of the seat belt tensioner deploying. |
| WARNING | Pyrotechnical SRS components must never be taken apart, repaired or transferred to another vehicle. |