Home ReviewsRefund
Home/Volvo/S60/Volvo S60 I рестайлинг (2004-2009)/Repair manual/Automatic HVAC System/Pressure Sensor/receiver Drier - Removal & Installation: Ov…
Contents Section: Automatic HVAC System All sections

Pressure Sensor/receiver Drier - Removal & Installation: Overview Volvo S60 I рестайлинг

Automatic HVAC System 1 illustration

Remove

  1. the condenser. See «Condenser, replacing»(ref-415378-S11300868082011081500000) (engine B5254T4) or «Condenser, replacing»(ref-415378-S33408293212011081500000) (other engines)
  2. the switch from the pressure sensor.

Scheme 691

Scheme 691
Scheme 691
  1. the pressure sensor.
  1. Position the pressure sensor. Tighten.

Note. Always use new O-rings lubricated with compressor oil

Tighten to 10 Nm

Install

  1. the condenser. See «Condenser, replacing»(ref-415378-S11300868082011081500000) (engine B5254T4) or «Condenser, replacing»(ref-415378-S33408293212011081500000) (other engines).

More articles — Pressure Sensor/receiver Drier - Removal & Installation