Home ReviewsRefund
Home/Volvo/C70/Volvo C70 II (2005-2009)/Repair manual/Testing & Diagnostics/Engine Control Module (ECM) Diagnostic Trouble Codes - 2 of…
Contents Wiring diagrams Section: Testing & Diagnostics All sections

Engine Control Module (ECM) Diagnostic Trouble Codes - 2 of 8: Maintenance Volvo C70 II

Testing & Diagnostics ~112 words

RESETTING ADAPTATION

  1. Switch off the engine.
  2. Ignition on. Reset the adaptations using the VCT2000 (or appropriate scan tool). This is done so that the system can be started from normal. As a result, it is easier to, see if the adaptations are going up or down.
  1. Continue Refer to «START ADAPTATIONS»(ref-488477-S33378137682012072500000)
  1. Switch off the engine.
  2. Ignition on. Reset the adaptations using the VCT2000 (or appropriate scan tool). This is done so that the system can be started from normal. As a result, it is easier to, see if the adaptations are going up or down.
  1. Continue Refer to «START ADAPTATIONS»(ref-488477-S36689682242012072500000)

More articles — Engine Control Module (ECM) Diagnostic Trouble Codes - 2 of 8