CALIBRATION OF POSITION SENSOR
Use this option to calibrate the Convertible Roof Module (CRM) to the position of the position sensors. So that the roof sections do not collide during operation, this option must be run after
- downloading software to the Convertible Roof Module (CRM)
- replacing the position sensors
- replacing the entire roof
- replacing the Convertible Roof Module (CRM).
QUICK-TESTS, CALIBRATIONS
Quick-tests or calibrations are functions or checks that are integrated in the control module's software and are started by the control module using commands from the diagnostics tool.
Wit this service it is possible to start certain pre-defined checks or teach-ins. Examples of these are
- Quick-test of fuel tank system
- Quick-test of camshaft control
- Resetting of adaptions and counter for oil
- Calibration of gear position sensor
- Calibration of components for Brake control module (BCM)
Note. To enable start and running of these services, it is often that certain start conditions must be fulfilled.