Starter No-Load Test
With starter on bench, operate starter and check ammeter, voltage and RPM. Readings should be within specification. See STARTER NO-LOAD TEST SPECIFICATIONS table.
| Application | Volts | Amps. | RPM |
|---|---|---|---|
| 0 001 108 088 | 11.5 | 75 | 2900 |
| 0 001 108 089 | 11.5 | 75 | 2900 |
| 0 001 108 090 | 11.5 | 75 | 2900 |
| 0 001 110 063 | 11.2 | 95 | 2800 |
| 0 001 110 068 | 11.2 | 95 | 2800 |
| 0 001 115 002 | 11.6 | 100 | 3140 |
| 0 001 218 017 | 11.6 | 100 | 3140 |
| 0 001 218 130 | 10.5 | 160 | 4200 |
STARTER NO-LOAD TEST SPECIFICATIONS
Solenoid Test
Connect negative battery cable to starter solenoid terminal "M". Connect battery positive lead to solenoid terminal No. 50. (Схема №2) If plunger does not extend firmly, replace solenoid.
TROUBLE SHOOTING
Note. See TROUBLE SHOOTING - BASIC PROCEDURES article in GENERAL INFORMATION.