Home/Volvo/960/Volvo 960 I рестайлинг (1994-1997)/Repair manual/Procedures/Maintenance Information: Removal & Installation
Contents Section: Procedures All sections

Maintenance Information: Removal & Installation Volvo 960 I рестайлинг

Procedures 5 illustrations

TIMING BELT REPLACEMENT

Model YearPart Number20K30K40K50K60K70K90K100K
1992271705-6B"C""X"X
1993 *271705-6"D""X"X"
1994271856-7"""X"""X
1995271876-5"""""E""

TIMING BELT REPLACEMENT

Scheme 6

Scheme 6: ELECTRONIC AIR PUMP SYSTEM (1995-96)

Scheme 7

Scheme 7: BODY LUBRICATION POINTS

Scheme 8

Scheme 8: REAR AXLE SERVICE POINTS

Note. All sedan and 1995-96 wagon models have an Independent Rear axle, the 1992-94 wagons have a solid axle.

Scheme 9

Scheme 9: VEHICLE LIFT POINTS

Note. For more information regarding lifting and hoisting refer to the JACKING & HOISTING article in the WHEEL ALIGNMENT section.

Scheme 10

Scheme 10: INFORMATION LABEL LOCATIONS

BRAKE PAD REPLACEMENT

WARNINGUse caution when checking and/or changing brake pads, some pads may contain asbestos which can irritate eyes and may cause other health hazards. A water based solution should be used to clean brake dust from wheel and brake components. DO NOT use compressed air to blow off brake dust.