FASTENER TIGHTENING SPECIFICATIONS
| Component | Fastener Size | Nm |
|---|
| After Run Coolant Pump Bracket to Mounting Bracket Bolt | | 8 |
| After Run Coolant Pump Mounting Bracket to Cylinder Block Bolt | | 40 |
| Connecting Piece to Coolant Pump Bolt | | 9 |
| Engine Coolant Temperature Sensor Retaining Plate to Coolant Pump Bolt | | 4 |
| Fan to Fan Shroud Nut | | 10 |
| Fan Shroud to Radiator Bolt | | 5 |
| Front Coolant Pipe Bolt | | 5 |
| Radiator to Charge Air Cooler Bolt | | 5 |
| Small Coolant Pipe Bolt | | 9 |
| Toothed Belt Drive Gear to Balance Shaft Bolt (1) , (2) | | 17 |
| Toothed Belt Guard to Coolant Pump Bolt | | 9 |
| (1) Always replace (2) Left hand threads |
Coolant Pump Bolt Tightening Sequence and Specification
Tighten the coolant pump bolts in the sequence -1 through 5- shown to 9 Nm.
