FASTENER TIGHTENING SPECIFICATIONS
| Component | Fastener Size | Nm |
|---|
| After Run Coolant Pump Bracket to Bracket Bolt | | 8 |
| After Run Coolant Pump Bracket to Upper Oil Pan Bolt | | 40 |
| Connecting Piece to Coolant Pump Bolt | | 9 |
| Coolant Expansion Tank Bolt | | 5 |
| Coolant Fan to Fan Shroud Nut | | 10 |
| Engine Coolant Temperature Sensor Retaining Plate to Coolant Pump Bolt | | 4 |
| Fan Shroud to Radiator Bolt | | 5 |
| Front Coolant Pipe Bolt | | 3.5 |
| Radiator to Charge Air Pipe Bolt (3) | | 5 |
| Small Coolant Pipe Bolt | | 9 |
| Toothed Belt Drive Gear to Balance Shaft Bolt 1, 2 | | 10 + 90° |
| Toothed Belt Guard to Coolant Pump Bolt | | 9 |
| (1) Always replace (2) Has left hand threads (3) Eos, GTI, Passat and CC only |
| (3) | Eos, GTI, Passat and CC only |
Coolant Pump Bolt Tightening Sequence and Specification
Tighten the bolts in sequence -1 through 5- to 9 Nm.
