FASTENER TIGHTENING SPECIFICATIONS
| Component | Fastener Size | Nm |
|---|
| Ball Joint to Control Arm (1) |
| Steel Control Arm | | 60 |
| Sheet Steel and Aluminum Control Arms | | 100 |
| Coupling Rod to Strut Nut (1) | | 65 |
| Drive Axle to Wheel Hub Bolt (1) | | 70 + 90° turn |
| Front Level Control System Sensor to Control Arm Nut (1) | | 9 |
| Front Level Control System Sensor to Subframe Bolt | M6 x 16 | 9 |
| Left Front Body Acceleration Sensor to Bracket Bolt (1) | | 5 |
| Rear Body Acceleration Sensor to Bracket Bolt (1) | | 5 |
| Rear Level Control System Sensor to Lower Transverse Link Bolt | M5 x 20 | 5 |
| Rear Level Control System Sensor to Subframe Bolt | M5 x 20 | 5 |
| Right Front Body Acceleration Sensor to Bracket Nut (1) | | 5 |
| Shock Absorber to Body Bolt (1) | M10 x 35 | 50 + 45° turn |
| Shock Absorber Mount to Shock Absorber Nut | M10 x 1.0 | 25 |
| Shock Absorber to Strut Bearing Nut (1) | M14 x 1.5 | 60 |
| Shock Absorber to Wheel Bearing Housing Bolt | M14 x 1.5 x 85 | 180 |
| Strut to Body Bolt (1) | M8 x 26 | 15 + 90° turn |
| Strut to Wheel Bearing Housing Nut (1) | | 70 + 90° turn |
| (1) Always replace after removal. |
| (1) | Always replace after removal. |
