| Spark plug electrode gap | For new spark plug | 1.0 to 1.1 mm (0.039 to 0.043 in.) |
| Spark plug maximum electrode gap | For used spark plug | 1.3 mm (0.051 in.) |
| Camshaft timing oil control valve standard resistance | 1 - 2 | 6.9 to 7.9 ohms at 20 °C (68°F) |
| Throttle with motor body standard resistance | 1 (M-) - 2 (M+) | 0.3 to 100 ohms at 20 °C (68°F) |
| Accelerator pedal position No. 1 standard voltage | Accelerator pedal released | 0.5 to 1.1 V |
| Accelerator pedal depressed | 2.6 to 4.5 V |
| Accelerator pedal position No. 2 standard voltage | Accelerator pedal released | 1.2 to 2.0 V |
| Accelerator pedal depressed | 3.4 to 5.0 V |
| Camshaft position sensor standard resistance | | 1630 to 2740 ohms at cold |
| 2065 to 3225 ohms at hot |
| Crankshaft position sensor standard resistance | | 985 to 1600 ohms at cold |
| 1265 to 1890 ohms at hot |
| Engine coolant temperature sensor standard resistance | | 2.32 to 2.59 kohms Approximately 20°C (68°F) |
| 0.310 to 0.326 kohms Approximately 80°C (176°F) |
| Knock sensor standard resistance | | 120 to 280 kohms at 20 °C (68°F) |
| Air fuel ratio sensor standard resistance | 1 (HA1A) - 2 (+B) | 1.8 to 3.4 ohms at 20°C (68°F) |
| 1 (HA1A) - 4 (A1A-) | 10 kohms or higher |
| Heated oxygen sensor standard resistance | 1 (HT1B) - 2 (+B) | 11 to 16 ohms at 20°C (68°F) |
| 1 (HT1B) - 4 (E2) | 10 kohms or higher |
| EFI fuse standard resistance | 1 - 2 | Below 1 ohms |
| AM2 fuse standard resistance | 1 - 2 | Below 1 ohms |
| Integration relay (EFI relay) resistance | C1 - A1 | Below 1 ohms |
| C1 - A4 | 10 kohms or higher (Battery voltage not applied) |
| C1 - A4 | Below 1 ohms (Battery voltage applied to terminals A2 and A3) |
| Integration relay (FAN NO. 1 relay) resistance | B5 - B8 | 10 kohms or higher (Battery voltage not applied) |
| B5 - B8 | Below 1 ohms (Battery voltage applied to terminals B6 and B7) |
| Integration relay (IG2 relay) resistance | C1 - B1 | Below 1 ohms |
| C1 - B4 | 10 kohms or higher (Battery voltage not applied) |
| C1 - B4 | Below 1 ohms (Battery voltage applied to terminals B2 and B3) |
