| Spark plug electrode gap | For new spark plug | 0.7 to 0.8 mm (0.028 to 0.032 in.) |
| Spark plug maximum electrode gap | For used spark plug | 1.1 mm (0.043 in.) |
| Camshaft timing oil control valve standard resistance | 1 - 2 | 6.9 to 7.9 ohms at 20 °C (68°F) |
| Throttle body standard resistance | 1 (M-) - 2 (M+) | 0.3 to 100 ohms at 20 °C (68°F) |
| Accel sensor out No. 1 standard voltage | Accelerator pedal is released | 0.5 to 1.1 V |
| Accelerator pedal is fully depressed | 2.6 to 4.5 V |
| Accel sensor out No. 2 standard voltage | Accelerator pedal is released | 1.2 to 2.0 V |
| Accelerator pedal is fully depressed | 3.4 to 4.7 V |
| Mass air flow meter standard resistance | 1 (THA) - 2 (E2) | 13.6 to 18.4 kohms at -20°C (-4°F) |
| 2.21 to 2.69 kohms at 20°C (68°F) |
| 0.49 to 0.67 kohms at 60°C (140°F) |
| Camshaft position sensor standard resistance | 1 - 2 | 1630 to 2740 ohms at cold |
| 2065 to 3225 ohms at hot |
| Crankshaft position sensor standard resistance | 1 - 2 | 985 to 1600 ohms at cold |
| 1265 to 1890 ohms at hot |
| Engine coolant temperature sensor standard resistance | 1 - 2 | 2.32 to 2.59 kohms at 20°C (68°F) |
| 0.310 to 0.326 kohms at 80°C (176°F) |
| Knock sensor standard resistance | 1 - 2 | 120 to 280 kohms at 20 °C (68°F) |
| Heated oxygen sensor (for sensor 1) standard resistance | 1 (HT1A) - 2 (+B) | 5.3 to 7.5 ohms at 20°C (68°F) |
| 1 (HT1A) - 4 (A1A-) | 10 kohms or higher |
| Heated oxygen sensor (for sensor 2) standard resistance | 1 (HT1B) - 2 (+B) | 11 to 16 ohms at 20°C (68°F) |
| 1 (HT1B) - 4 (E2) | 10 kohms or higher |
| Integration relay (EFI MAIN relay) resistance | 1C-1 - 1E-4 | 10 kohms or higher (Battery voltage not applied between 1E-10 - 1D-7 terminals) |
| Below 1 ohms (Battery voltage applied between 1E-10 - 1D-7 terminals) |
| Integration relay (C/OPN relay) resistance | 1E-4 - 1E-5 | 10 kohms or higher (Battery voltage not applied between 1E-11 - 1D-9 terminals) |
| Below 1 ohms (Battery voltage applied between 1E-11 - 1D-9 terminals) |
| Integration relay (IG2 relay) resistance | 1C-1 - 1D-9 | 10 kohms or higher (Battery voltage not applied between 1E-10 - 1D-17 terminals) |
| Below 1 ohms (Battery voltage applied between 1E-10 - 1D-17 terminals) |
| Integration relay (HORN relay) resistance | 1C-1 - 1E-7 | 10 kohms or higher (Battery voltage not applied between 1C-1 - 1D-18 terminals) |
| Below 1 ohms (Battery voltage applied between 1C-1 - 1D-18 terminals) |
