BELT ADJUSTMENT
| Application | New Belt | Used Belt |
|---|
| Camry |
| Alternator |
| Without A/C | 125 (57) | 95 (43) |
| With A/C | 175 (79) | 130 (59) |
| P/S | 125 (57) | 80 (36) |
| Celica |
| 3S-GTE Engine |
| Alternator |
| With A/C | 175 (79) | 115 (52) |
| Without A/C | 150 (68) | 130 (59) |
| P/S | 125 (57) | 80 (36) |
| 4A-FE Engine |
| Alternator | 160 (73) | 130 (59) |
| A/C Compressor | 160 (73) | 100 (45) |
| P/S | 125 (57) | 80 (36) |
| 5S-FE Engine |
| Alternator |
| With A/C | 175 (79) | 130 (59) |
| Without A/C | 125 (57) | 95 (43) |
| P/S | 125 (57) | 80 (36) |
| Corolla |
| A/C | 160 (73) | 100 (45) |
| Alternator | 160 (73) | 130 (59) |
| P/S | 100 (45) | 55 (25) |
| MR2 |
| Alternator | 120 (54) | 104 (47) |
| A/C | 160 (73) | 100 (45) |
| Paseo & Tercel |
| A/C Only | 165 (75) | 110 (50) |
| All Others | 160 (73) | 100 (45) |
| Pickup & 4Runner | 125 (57) | 80 (36) |
| Previa |
| Alternator & P/S | 170 (77) | 125 (57) |
| A/C | 140 (64) | 120 (54) |
| (1) Tension in lbs. (kg) using Burroughs tension gauge. |
| (1) | Tension in lbs. (kg) using Burroughs tension gauge. |
ENGINE BELT ADJUSTMENT (4-CYLINDER) (1)
| Application | New Belt | Used Belt |
|---|
| Camry |
| Alternator | 175 (79) | 115 (52) |
| P/S | 125 (57) | 80 (36) |
| Cressida |
| Alternator | 175 (79) | 115 (52) |
| A/C | 160 (73) | 105 (48) |
| P/S | 160 (73) | 100 (45) |
| Land Cruiser |
| A/C | 125 (57) | 80 (36) |
| Alternator & P/S | 145 (66) | 100 (45) |
| Pickup & 4Runner |
| Alternator | 160 (73) | 100 (45) |
| A/C & P/S | 125 (57) | 80 (36) |
| Supra |
| Alternator | 175 (79) | 115 (52) |
| A/C | 160 (73) | 105 (48) |
| P/S | 160 (73) | 100 (45) |
| (1) Tension in lbs. (kg) using Burroughs tension gauge. |
| (1) | Tension in lbs. (kg) using Burroughs tension gauge. |
ENGINE BELT ADJUSTMENT (6-CYLINDER & V6) (1)
| Application | Specification |
|---|
| Coolant Replacement Interval |
| First Service | 45,000 Miles Or 36 Months |
| Subsequent Servicing | 30,000 Miles Or 24 Months |
| Coolant Capacity |
| Camry | 6.7 Qts. (6.3L) |
| Celica |
| 3S-GTE | 6.9 Qts. (6.5L) |
| 4A-FE |
| A/T | 5.9 Qts. (5.6L) |
| M/T | 5.5 Qts. (5.2L) |
| 5S-FE |
| A/T | 6.4 Qts. (6.1L) |
| M/T | 6.6 Qts. (6.2L) |
| Corolla |
| A/T | 6.4 Qts. (6.1L) |
| M/T | 6.5 Qts. (6.2L) |
| MR2 |
| 3S-GTE | 14.4 Qts. (13.6L) |
| 5S-FE | 13.7 Qts. (13.0L) |
| Paseo |
| A/T | 5.7 Qts. (5.4L) |
| M/T | 5.3 Qts. (5.0L) |
| Pickup & 4Runner |
| Except 4WD A/T | 8.9 Qts. (8.4L) |
| 4WD A/T | 9.6 Qts. (9.1L) |
| Previa | 12.3 Qts. (11.6L) |
| Tercel |
| A/T | 5.7 Qts. (5.4L) |
| M/T | 5.2 Qts. (4.9L) |
| Pressure Cap Standard Opening Pressure | 10.7-14.9 psi |
| Thermostat Opens (1) |
| Camry, Celica, Corolla, MR2, Paseo, Previa & Tercel | 176-183°F (80-84°C) |
| Pickup & 4Runner | 187-194°F (86-90°C) |
| (1) If thermostat is equipped with a "jiggle valve" on its flange, install "jiggle valve" properly. On Camry, Celica, MR2, Paseo, Previa and Tercel, align "jiggle valve" with protrusion on thermostat housing. On Corolla, align "jiggle valve" with stud bolt or above water inlet housing. |
| (1) | If thermostat is equipped with a "jiggle valve" on its flange, install "jiggle valve" properly. On Camry, Celica, MR2, Paseo, Previa and Tercel, align "jiggle valve" with protrusion on thermostat housing. On Corolla, align "jiggle valve" with stud bolt or above water inlet housing. |
ENGINE COOLING SYSTEM SPECIFICATIONS (4-CYLINDER)
| Application | Specification |
|---|
| Coolant Replacement Interval |
| First Service | 45,000 Miles Or 36 Months |
| Subsequent Servicing | 30,000 Miles Or 24 Months |
| Coolant Capacity |
| Camry |
| A/T | 8.0 Qts. (8.4L) |
| M/T | 9.0 Qts. (8.5L) |
| Cressida | 8.8 Qts. (8.3L) |
| Land Cruiser |
| With Rear Heater | 20.6 Qts. (19.5L) |
| Without Rear Heater | 18.5 Qts. (17.5L) |
| Pickup & 4Runner |
| A/T | 10.9 Qts. (10.3L) |
| M/T | 11.1 Qts. (10.5L) |
| Supra | 8.6 Qts. (8.1L) |
| Pressure Cap Standard Opening Pressure | 10.7-14.9 psi |
| `Thermostat Opens (1) |
| Camry, Pickup & 4Runner | 176-183°F (80-84°C) |
| Cressida, Land Cruiser & Supra | 187-194°F (86-90°C) |
| (1) If thermostat is equipped with a "jiggle valve" on its flange, ensure "jiggle valve" is installed at 12 o'clock (straight-up) position. This applies to engines where thermostat flange is vertical when installed. |
| (1) | If thermostat is equipped with a "jiggle valve" on its flange, ensure "jiggle valve" is installed at 12 o'clock (straight-up) position. This applies to engines where thermostat flange is vertical when installed. |
ENGINE COOLING SYSTEM SPECIFICATIONS (6-CYLINDER & V6)
