IG2 RELAY
Note. IG2 relay may also be referred to as ignition relay.
IG2 relay is located in fuse/relay box at driver's side front corner of engine compartment, just in front of strut tower. Testing information is not available from manufacturer. Consult wiring diagram for IG2 relay testing. See WIRING DIAGRAMS article.
- Remove IG2 relay from relay box on firewall at driver's side front corner of engine compartment. (Scheme 292)
- To test IG2 relay continuity, using ohmmeter, check for continuity and no continuity between specified terminals on IG2 relay. see scheme 112
- To test IG2 relay operation, apply battery voltage and ground to IG2 relay. Using ohmmeter, check for continuity between specified terminals on IG2 relay. see scheme 112 Replace IG2 relay if defective.
| WARNING | Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
IG2 relay is located in fuse/relay box at driver's side front corner of engine compartment. Testing information is not available from manufacturer. Consult wiring diagram for IG2 relay testing. See WIRING DIAGRAMS article.
- Remove IG2 relay from relay box located at driver's side front corner of engine compartment. (Scheme 294)
- To test IG2 relay continuity, using ohmmeter, check for continuity and no continuity between specified terminals on IG2 relay. see scheme 112
- To test IG2 relay operation, apply battery voltage and ground to IG2 relay. Using ohmmeter, check for continuity between specified terminals on IG2 relay. see scheme 112 Replace IG2 relay if defective.