CAPACITY
| Application | (1) Quantity |
|---|
| Previa | 1.1 Qts. (1.0L) |
| Tacoma & 4Runner | 1.2 Qts. (1.2L) |
| T100 | 2.0 Qts. (1.9L) |
| (1) Approximate quantity listed. |
| (1) | Approximate quantity listed. |
DIFFERENTIAL FLUID CAPACITY
AXLE ASSEMBLY SPECIFICATIONS
| Application | Specification |
|---|
| Companion Flange Runout |
| Lateral Runout | .0039" (.100 mm) |
| Vertical Runout | .0039" (.100 mm) |
| Drive Pinion Rotating Torque |
| Previa |
| New Bearings | 8.7-13.9 INCH lbs. (1.0-1.6 N.m) |
| Used Bearings | 4.3-6.9 INCH lbs. (.5-.8 N.m) |
| Tacoma, T100 & 4Runner |
| New Bearings | 10.4-16.5 INCH lbs. (1.2-1.9 N.m) |
| Used Bearings | 5.2-8.7 INCH lbs. (.6-1.0 N.m) |
| Ring Gear Backlash |
| Previa, Tacoma & T100 | .0051-.0071" (.130-.180 mm) |
| 4Runner | .0039-.0071" (.100-.180 mm) |
| Ring Gear Runout |
| Previa, T100 & 4Runner | .0028" (.070 mm) |
| Side Gear Backlash |
| Previa & T100 | .0020-.0079" (.050-.200 mm) |
| Tacoma & 4Runner | .0000-.0079" (.000-.200 mm) |
| Total Assembled Preload (1) |
| Tacoma & 4Runner | 2.6-6.9 INCH lbs. (.3-.8 N.m) |
| T100 | 3.5-5.2 INCH lbs. (.4-.6 N.m) |
| Previa | 2.6-4.3 INCH lbs. (.3-.5 N.m) |
| (1) Add this amount to drive pinion rotating torque to obtain total preload. |
| (1) | Add this amount to drive pinion rotating torque to obtain total preload. |
AXLE ASSEMBLY SPECIFICATIONS
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Previa |
| Axle Shaft Flange-To-Side Gear Shaft Bolt/Nut | 51 (69) |
| Differential Assembly Mounting Bolt | 54 (73) |
| Differential Carrier Cover Bolt | 34 (46) |
| Drive Pinion Nut | 80-164 (109-223) |
| Drive Shaft Center Bearing Bolt | 27 (37) |
| Drive Shaft Companion Flange Bolt/Nut | 54 (73) |
| Ring Gear Bolt | 71 (96) |
| Side Bearing Cap Bolt | 58 (79) |
| Side Gear Shaft Tube Bolt | 65 (88) |
| Tacoma & 4Runner |
| Clutch Case Bolt | 58 (79) |
| Clutch Case Cover Bolt | 15 (20) |
| Differential Assembly Mounting Bolt |
| Front Mount Cushion Bolt | 101 (137) |
| Front Mount-To-Differential Bolt | 116 (157) |
| Rear Mount Cushion Nut | 64 (87) |
| Rear Mount-To-Differential Bolt | 80 (108) |
| Drive Pinion Nut | 80-164 (109-223) |
| Drive Shaft Companion Flange Bolt/Nut | 54 (73) |
| Ring Gear Bolt | 71 (96) |
| Side Bearing Retainer Bolt | 51 (69) |
| Side Gear Shaft Tube Bolt |
| With Automatic Disconnecting Differential (ADD) | 58 (79) |
| Without Automatic Disconnecting Differential (ADD) | 77 (104) |
| T100 |
| Axle Shaft Flange-To-Side Gear Shaft Nut | 61 (83) |
| Clutch Case Bolt | 58 (79) |
| Clutch Case Cover Bolt | 15 (20) |
| Crossmember Bolt | 93 (126) |
| Differential Assembly Mounting Bolt |
| Differential Carrier Cover-To-Mount Bolt | 108 (146) |
| Side Mount Bracket-To-Mount Bolt | 123 (167) |
| Differential Carrier Cover Bolt | 34 (46) |
| Drive Pinion Nut | 89-165 (121-223) |
| Drive Shaft Companion Flange Bolt/Nut | 54 (73) |
| Ring Gear Bolt | 71 (96) |
| Side Bearing Cap Bolt | 58 (79) |
| Side Gear Shaft Tube Bolt |
| With Automatic Disconnecting Differential (ADD) | 58 (79) |
| Without Automatic Disconnecting Differential (ADD) | 65 (88) |
