Engine Mechanical [2GR-FE] [Service Specifications]: Specifications

TORQUE SPECIFICATIONS

Part Tightened	N*m	Kgf*cm	Ft.*lbf
Front wheel RH	103	1050	76

DRIVE BELT

Part Tightened		N*m	Kgf*cm	Ft.*lbf
Camshaft bearing cap x Camshaft housing	1st	10	102	7
Camshaft bearing cap x Camshaft housing	2nd	16	163	12
Camshaft housing x Cylinder head sub-assembly		28	286	21
No. 3 Chain tensioner x Cylinder head sub-assembly		21	214	15
Camshaft timing gear assembly x Camshaft		100	1020	74
Camshaft timing exhaust gear assembly x Camshaft		100	1020	74
No. 2 Chain tensioner x Cylinder head sub-assembly		21	214	15

CAMSHAFT

Part Tightened		N*m	Kgf*cm	Ft.*lbf
Cylinder head sub-assembly LH x Cylinder block sub-assembly	Recessed head 1st	36	367	27
	2nd	Turn 90°	Turn 90°	Turn 90°
	3nd	Turn 90°	Turn 90°	Turn 90°
	14 mm (0.55 in.) head	30	306	22
Cylinder head sub-assembly RH x Cylinder block sub-assembly	1st	36	367	27
	2nd	Turn 90°	Turn 90°	Turn 90°
	3nd	Turn 90°	Turn 90°	Turn 90°
Crankshaft pulley x Crankshaft		250	2550	184
Front wheel RH		103	1050	76

CYLINDER HEAD GASKET

Part Tightened	N*m	Kgf*cm	Ft.*lbf
Drive plate and ring gear sub-assembly x Crankshaft	83	846	61

REAR CRANKSHAFT OIL SEAL

Part Tightened		N*m	Kgf*cm	Ft.*lbf
No. 1 engine hanger x Cylinder head sub-assembly		33	337	24
No. 2 engine hanger x Cylinder head sub-assembly		33	337	24
Rear engine mounting bracket x Cylinder block		64	649	47
Engine mounting bracket RH x Cylinder block		54	551	40
Rear engine mounting bracket x Stiffener plate RH	Bolt A	34	347	25
Rear engine mounting bracket x Stiffener plate RH	Bolt B	78	796	58
Manifold stay x Exhaust manifold sub-assembly RH		35	357	26
Manifold stay x Rear engine mounting bracket		34	347	25
Flexible hose bracket clamp sub-assembly x Cylinder head sub-assembly		5.5	56	49 in.*lbf
Rear engine mounting insulator sub-assembly x Automatic transaxle assembly		75	765	55
Front engine mounting insulator x Front engine mounting bracket		87	888	65
Engine mounting insulator LH x Automatic transaxle assembly		95	969	71
Engine mounting insulator RH x Engine mounting bracket RH		95	969	71
Frame side rail plate x Body	Nut	32	327	24
	Bolt A	32	327	24
	Bolt B	85	867	63
Front suspension member brace rear x Body	Nut	32	327	24
	Bolt C	32	327	24
	Bolt D	85	867	63
Drive plate and ring gear sub-assembly x torque converter		41	418	30
Flywheel housing under cover x Automatic transaxle assembly		10	102	7
Engine moving control rod x Engine moving control rod bracket		52	530	38
Engine moving control rod x Body		38	387	28
Engine moving control rod bracket x No. 1 front engine mounting bracket LH		38	387	28
Transmission control cable x Control shaft lever		12	122	9
Engine wire x Engine room junction block		8.4	86	74 in.*lbf
Earth wire x Body		8.4	86	74 in.*lbf
Air cleaner inlet cover assembly seal x Body		8.0	82	71 in.*lbf
Front wheel RH		103	1050	76

ENGINE ASSEMBLY

Part Tightened		N*m	Kgf*cm	Ft.*lbf
Engine rear oil seal retainer x Cylinder block sub-assembly		10	102	7
Water inlet pipe x Cylinder block sub-assembly		10	102	7
No. 1 Chain vibration damper x Cylinder block sub-assembly		23	230	17
Idle sprocket assembly x Cylinder block sub-assembly		60	612	44
No. 1 Chain tensioner assembly x Cylinder head sub-assembly		10	102	7
Water pump assembly x Timing chain cover sub-assembly		11	112	8
Timing chain cover sub-assembly x Cylinder head and block	Areas 1: Bolt	21	214	15
	Areas 2: Bolt	21	214	15
	Areas 3: Bolt and nut	21	214	15
	Areas 4: Bolt A	43	438	32
	Areas 4: Except bolt A	21	214	15
Timing chain cover plate x Timing chain cover sub-assembly		9.1	93	81 in.*lbf
Stud bolt x Water inlet housing		4.0	41	35 in.*lbf
Water inlet housing x Timing chain cover sub-assembly		10	102	7
Drain cock assembly x Water inlet housing		30	306	22
Drain cock plug x Drain cock assembly		13	130	9
Water inlet x Water inlet housing		10	102	70
Stud bolt x No. 1 front engine mounting bracket LH		10	102	70
No. 1 front engine mounting bracket LH x Timing chain cover sub-assembly		54	550	40
No. 1 oil pan baffle plate x Cylinder block sub-assembly		10	102	7
Oil pan stud bolt x Cylinder block and timing chain cover sub-assembly	Bolt A	10	102	7
	Bolt B	9.0	92	80 in.*lbf
Oil pan sub-assembly x Cylinder block and timing chain cover sub-assembly	Bolt A	10	102	7
	Except bolt A	21	214	15
Oil strainer stud bolt x Timing chain cover sub-assembly		4.0	41	35 in.*lbf
Oil strainer sub-assembly x Cylinder block and timing chain cover sub-assembly		10	102	7
Oil pan stud bolt x Oil pan sub-assembly		4.0	41	35 in.*lbf
No. 2 oil pan sub-assembly x Oil pan sub-assembly		10	102	7
Oil pan drain plug x No. 2 oil pan sub-assembly		40	408	30
Cylinder head cover sub-assembly LH x Cylinder head sub-assembly LH	Bolt A	21	214	15
	Except bolt A	10	102	7
Cylinder head cover sub-assembly RH x Cylinder head sub-assembly RH	Bolt A	21	214	15
	Except bolt A	10	102	7
Water outlet x Cylinder head sub-assembly		10	102	7
Engine oil level dipstick guide x Cylinder block sub-assembly		21	214	15
No. 1 oil cooler bracket x stud bolt		10	102	7
No. 1 oil cooler bracket x Oil cooler pipe		21	214	15
No. 1 oil cooler bracket x Cylinder block sub-assembly		21	214	15
No. 1 oil cooler bracket x Oil pan sub-assembly		21	214	15
Oil cooler assembly x No. 1 oil cooler bracket		68	693	50
Water by-pass hose clamp x Cylinder block sub-assembly		10	102	7
Cylinder block water drain cock sub-assembly x Cylinder block sub-assembly		25	255	18
Cylinder block water drain cock sub-assembly x Cylinder block water drain cock plug		13	130	9
No. 1 oil pipe union x Cylinder block sub-assembly LH		65	663	48
No. 1 oil pipe union x Cylinder head cover sub-assembly LH		65	663	48
Oil pipe union x Cylinder block sub-assembly		65	663	48
Oil pipe union x Cylinder head cover sub-assembly		65	663	48
Oil pipe x Cylinder head sub-assembly		10	102	7
Ventilation valve x Cylinder head cover sub-assembly LH		27	275	20
Engine oil pressure switch assembly x Oil pan sub-assembly		15	153	11
No. 1 vacuum switching valve assembly x Cylinder head cover sub-assembly LH		10	102	7
No. 2 idler pulley sub-assembly x Timing chain cover sub-assembly		54	550	40
No. 2 timing gear cover x Timing chain cover sub-assembly		6.0	61	53 in.*lbf
V-ribbed belt tensioner assembly x Cylinder block sub-assembly		43	438	32
Exhaust manifold sub-assembly LH x Cylinder head sub-assembly LH		21	214	15
No. 2 engine oil level dipstick guide x Cylinder head sub-assembly		21	214	15
Exhaust manifold sub-assembly RH x Cylinder head sub-assembly RH		21	214	15
Intake manifold x Cylinder head sub-assembly		21	214	15
Fuel hose protector x Cylinder head sub-assembly	Bolt	21	214	15
Fuel hose protector x Cylinder head sub-assembly	Nut	10	102	7
Fuel hose protector x Intake manifold		21	214	15
No. 2 engine mounting stay RH x Intake manifold		21	214	15
No. 1 surge tank stay x Cylinder head cover sub-assembly		21	214	15
Throttle body bracket x Cylinder head cover sub-assembly		21	214	15
No. 1 engine hanger x Cylinder head sub-assembly		33	337	24
No. 2 engine hanger x Cylinder head sub-assembly		33	337	24

ENGINE UNIT

Part Tightened		N*m	Kgf*cm	Ft.*lbf
Stud bolt x Cylinder head sub-assembly	Bolts A and B	10	102	7
Stud bolt x Cylinder head sub-assembly	Bolt C	4.0	41	35 in.*lbf
No. 1 straight screw plug x Cylinder head sub-assembly		44	449	32
No. 2 straight screw plug x Cylinder head sub-assembly		80	816	59

CYLINDER HEAD

Part Tightened		N*m	Kgf*cm	Ft.*lbf
Stud bolt x Cylinder block sub-assembly	Bolt A	10	102	7
Stud bolt x Cylinder block sub-assembly	Bolt B	17	173	13
No. 1 oil nozzle sub-assembly x Cylinder block sub-assembly		9.0	92	80 in.*lbf
Main bearing cap x Cylinder block sub-assembly	1st	61	622	45
	2nd	Turn 90°	Turn 90°	Turn 90°
	14 mm head	52	525	38
Connecting rod cap x Connecting rod	1st	25	255	18
Connecting rod cap x Connecting rod	2nd	Turn 90°	Turn 90°	Turn 90°

CYLINDER BLOCK

Engine Mechanical [2GR-FE] [Service Specifications]: Specifications Toyota Sienna III

TORQUE SPECIFICATIONS

More articles — Engine Mechanical [2GR-FE] [Service Specifications]

Login / Signup

Enter the code

You have successfully logged in!