SPECIFIED TORQUE FOR STANDARD BOLTS
| Class | Diameter mm | Pitch mm | Specified torque | |||||
|---|---|---|---|---|---|---|---|---|
| Hexagon head bolt | Hexagon flange bolt | |||||||
| N.m | Kgf.cm | Ft.lbf | N.m | Kgf.cm | Ft.lbf | |||
| 4T | 6 | 1 | 5 | 55 | 48 in..lbf | 6 | 60 | 52 in..lbf |
| 8 | 1.25 | 12.5 | 130 | 9 | 14 | 145 | 10 | |
| 10 | 1.25 | 26 | 260 | 19 | 29 | 290 | 21 | |
| 12 | 1.25 | 47 | 480 | 35 | 53 | 540 | 39 | |
| 14 | 1.5 | 74 | 760 | 55 | 84 | 850 | 61 | |
| 16 | 1.5 | 115 | 1,150 | 83 | ||||
| 5T | 6 | 1 | 6.5 | 65 | 56 in..lbf | 7.5 | 75 | 65 in..lbf |
| 8 | 1.25 | 15.5 | 160 | 12 | 17.5 | 175 | 13 | |
| 10 | 1.25 | 32 | 330 | 24 | 36 | 360 | 26 | |
| 12 | 1.25 | 59 | 600 | 43 | 65 | 670 | 48 | |
| 14 | 1.5 | 91 | 930 | 67 | 100 | 1,050 | 76 | |
| 16 | 1.5 | 140 | 1,400 | 101 | ||||
| 6T | 6 | 1 | 8 | 80 | 69 in..lbf | 9 | 90 | 78 in..lbf |
| 8 | 1.25 | 19 | 195 | 14 | 21 | 210 | 15 | |
| 10 | 1.25 | 39 | 400 | 29 | 44 | 440 | 32 | |
| 12 | 1.25 | 71 | 730 | 53 | 80 | 810 | 59 | |
| 14 | 1.5 | 110 | 1,100 | 80 | 125 | 1,250 | 90 | |
| 16 | 1.5 | 170 | 1,750 | 127 | ||||
| 7T | 6 | 1 | 10.5 | 110 | 8 | 12 | 120 | 9 |
| 8 | 1.25 | 25 | 260 | 19 | 28 | 290 | 21 | |
| 10 | 1.25 | 52 | 530 | 38 | 58 | 590 | 43 | |
| 12 | 1.25 | 95 | 970 | 70 | 105 | 1,050 | 76 | |
| 14 | 1.5 | 145 | 1,500 | 108 | 165 | 1,700 | 123 | |
| 16 | 1.5 | 230 | 2,300 | 166 | ||||
| 8T | 8 | 1.25 | 29 | 300 | 22 | 33 | 330 | 24 |
| 10 | 1.25 | 61 | 620 | 45 | 68 | 690 | 50 | |
| 12 | 1.25 | 110 | 1,100 | 80 | 120 | 1,250 | 90 | |
| 9T | 8 | 1.25 | 34 | 340 | 25 | 37 | 380 | 27 |
| 10 | 1.25 | 70 | 710 | 51 | 78 | 790 | 57 | |
| 12 | 1.25 | 125 | 1,300 | 94 | 140 | 1,450 | 105 | |
| 10T | 8 | 1.25 | 38 | 390 | 28 | 42 | 430 | 31 |
| 10 | 1.25 | 78 | 800 | 58 | 88 | 890 | 64 | |
| 12 | 1.25 | 140 | 1,450 | 105 | 155 | 1,600 | 116 | |
| 11T | 8 | 1.25 | 42 | 430 | 31 | 47 | 480 | 35 |
| 10 | 1.25 | 87 | 890 | 64 | 97 | 990 | 72 | |
| 12 | 1.25 | 155 | 1,600 | 116 | 175 | 1,800 | 130 | |
Standard Bolts Torque Specifications
Scheme 56
HINT
Use the nut with the same number of the nut strength classification or the greater than the bolt strength classification number when tightening parts with a bolt and nut.
Example: Bolt = 4T
Nut = 4N or more
TORQUE SPECIFICATIONS
| Part tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| Fan shroud x Radiator assembly | 5.5 | 50 | 43 in..lbf | |
| Radiator bracket x Radiator assembly | 20 | 200 | 15 | |
| A/C Compressor x Cylinder block | 49 | 500 | 36 | |
| Generator x Generator bracket | 39 | 400 | 29 | |
| No.1 idler pulley, No.2 idler pulley x Cylinder Block | 34.5 | 350 | 25 | |
| Camshaft timing pulley x Camshaft timing tube | 8.1 | 83 | 72 in..lbf | |
| Drive belt tensioner x Cylinder block | 16 | 160 | 12 | |
| Timing belt tensioner x Oil pump | 26 | 270 | 19 | |
| Crankshaft pulley x Crankshaft | 245 | 2,500 | 181 | |
| Fan bracket x Cylinder block | 12 mm head | 16 | 160 | 12 |
| 14 mm head | 32 | 330 | 24 | |
| No.2 timing belt cover x Cylinder block | 16 | 160 | 12 | |
| No.3 timing belt cover x Cylinder block, cylinder head | 7.5 | 80 | 66 in..lbf | |
| Drive belt idler pulley x Fan bracket | 39 | 400 | 29 | |
| Fluid coupling x Fan bracket | 29 | 296 | 21 | |
| Exhaust manifold x Cylinder head | 44 | 450 | 33 | |
| Cylinder head x Cylinder block | 1st | 40 | 408 | 30 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| 3rd | Turn 90° | Turn 90° | Turn 90° | |
| Camshaft bearing cap x Cylinder head | Bolt A | 7.5 | 80 | 66 in..lbf |
| Others | 16 | 160 | 12 | |
| Cylinder head cover x Cylinder head | 6.0 | 60 | 53 in..lbf | |
| Engine hanger x Cylinder head | 37 | 380 | 27 | |
| Front water bypass joint, Rear water bypass joint x Cylinder head | 18 | 185 | 13 | |
| Intake manifold x Cylinder head | 18 | 185 | 13 | |
| Timing belt rear plate x Cylinder head | 7.5 | 80 | 66 in..lbf | |
| Drive plate x Crankshaft | 1st | 49 | 500 | 36 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Transmission x Cylinder block | 72 | 730 | 53 | |
| Transmission x No.1 oil pan | 37 | 380 | 27 | |
| Drive plate x Torque converter clutch | 48 | 490 | 35 | |
| Flywheel housing under cover x Transmission | 18 | 185 | 13 | |
| Engine rear mounting bracket x Transmission | 65 | 663 | 48 | |
| Frame crossmember x Rear engine mounting insulator | Bolt A | 18 | 183 | 13 |
| Bolt B | 72 | 730 | 53 | |
| Frame bracket x Engine mounting bracket | 38 | 388 | 28 | |
| PS pump x Cylinder head | 62 | 632 | 46 | |
| Main bearing cap x Cylinder block | 1st | 27 | 275 | 20 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Connecting rod cap x Connecting rod | 1st | 24.5 | 250 | 18 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Rear oil seal retainer x Cylinder block | 8.0 | 80 | 71 in..lbf | |
| Engine coolant drain union x Cylinder block | 49 | 500 | 36 | |
| Engine mounting bracket x Cylinder block | 36 | 370 | 27 | |
| Water bypass pipe x Cylinder block | 18 | 185 | 13 | |
| Front exhaust pipe x Exhaust manifold | 62 | 630 | 46 | |
| Center exhaust pipe x Front exhaust pipe | 48 | 489 | 35 | |
| Heated oxygen sensor (Bank 1, 2 sensor 2) x Front exhaust pipe | 44 | 450 | 32 | |
Torque Specifications - Engine Mechanical
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Front exhaust pipe at Exhaust manifold | 62 | 632 | 46 |
| Front exhaust pipe at Center pipe | 48 | 489 | 35 |
| Heated oxygen sensor at Front exhaust pipe | 44 | 450 | 32 |
| Air pump assembly at Cylinder head | 16 | 163 | 12 |
| Air switching valve No. 2 at Cylinder head | 10 | 102 | 7 |
| Air tube No. 3 at Cylinder head | 10 | 102 | 7 |
TORQUE SPECIFICATIONS
| Part tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| Fuel pressure pulsation damper x Delivery pipe | For use with SST | 33 | 340 | 24 |
| 39 | 400 | 29 | ||
| Fuel pressure regulator x RH delivery pipe | 7.5 | 80 | 66 in..lbf | |
| Front fuel pipe x Lower intake manifold | 7.5 | 80 | 66 in..lbf | |
| Fuel return pipe x Delivery pipe | 7.5 | 80 | 66 in..lbf | |
| Delivery pipe x Intake manifold | 21 | 214 | 15 | |
| Fuel tank band x Body | 62 | 632 | 45 | |
| Fuel pressure regulator x Delivery pipe | 7.5 | 76 | 66 in..lbf | |
| Throttle body x Intake manifold | 18 | 185 | 13 | |
| ECT sensor x Front water bypass joint | 19.6 | 200 | 14 | |
| Knock sensor x Cylinder head | 20 | 204 | 15 | |
| Air-fuel ratio sensor x Exhaust manifold | 44 | 450 | 32 | |
| Heated oxygen sensor x Front exhaust pipe | 44 | 450 | 32 | |
| Fuel pump resister x Body | 8 | 82 | 71 in..lbf | |
| Camshaft oil control valve x Cylinder head | 7.5 | 80 | 66 in..lbf | |
| Air pump assembly x Cylinder head | 16 | 163 | 12 | |
Torque Specifications - SFI
| Part tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| Drain plug x Union on cylinder block | 12.7 | 130 | 9 | |
| Fan x Fluid coupling | 8.5 | 85 | 75 in..lbf | |
| Water pump x Cylinder block | Bolt | 21 | 215 | 15 |
| Stud bolt and nut | 18 | 185 | 13 | |
| Water inlet housing x Water pump | 18 | 185 | 13 | |
| Water inlet x Water inlet housing | 19 | 195 | 14 | |
| Radiator x Radiator support | 12.7 | 130 | 9 | |
| No.1 fan shroud x Radiator | 5 | 50 | 44 in..lbf | |
| Radiator mounting bolt | 12 | 120 | 9 | |
Torque Specifications - Cooling
| Part tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| No.2 oil pan x Drain plug | 39 | 400 | 29 | |
| Oil pump body cover x Oil pump body | 10 | 105 | 8 | |
| Oil pump x Cylinder block | 14 mm head | 30.5 | 310 | 22 |
| Others | 15.5 | 160 | 11 | |
| Relief valve x Oil pump body | 49 | 500 | 36 | |
| Oil strainer x Cylinder block, Oil pump | 7.5 | 80 | 66 in..lbf | |
| No.1 oil pan x Oil pump, Oil seal retainer, Cylinder block | 10 mm head | 7.5 | 80 | 66 in..lbf |
| 12 mm head | 28 | 290 | 21 | |
| Oil pan baffle plate x No.1 oil pan | 7.5 | 80 | 66 in..lbf | |
| No.2 oil pan x No.1 oil pan | 7.5 | 80 | 66 in..lbf | |
| Oil filter bracket x Oil pump | 18 | 185 | 13 | |
| Oil dipstick guide x Cylinder head | 15 | 153 | 11 | |
| Oil cooler x Oil filter bracket | 68.6 | 700 | 51 | |
| Oil nozzle x Cylinder block | 9.0 | 92 | 80 in..lbf | |
Torque Specifications - Lubrication
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Spark plug at Cylinder head | 17.5 | 180 | 13 |
| Ignition coil (with igniter) at Cylinder head cover | 7.5 | 76 | 66 in.lbf |
| Camshaft position sensor at LH cylinder head | 7.5 | 76 | 66 in.lbf |
| Crankshaft position sensor at Oil pump | 6.5 | 65 | 58 in.lbf |
TORQUE SPECIFICATIONS
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Terminal 30 nut, Terminal C nut at Terminal bolt | 17 | 170 | 13 |
| End cover at Magnetic switch housing | 3.6 | 37 | 32 in.lbf |
| End cover at Brush holder | 3.8 | 39 | 34 in.lbf |
| Starter hosing at Magnetic switch | 9.3 | 95 | 82 in.lbf |
| End cover with field frame at Magnetic switch | 9.3 | 95 | 82 in.lbf |
| Lead wire of field coil at Terminal C | 5.9 | 60 | 52 in.lbf |
| Wire clamp, Starter wire at Starter | 9.81 | 100 | 87 in.lbf |
| Starter at Cylinder block | 39 | 400 | 29 |
TORQUE SPECIFICATIONS
| Part tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| Bearing retainer x Drive end frame | 2.6 | 27 | 23 in..lbf | |
| Rectifier end frame x Drive end frame | 5.8 | 59 | 51 in..lbf | |
| Generator pulley x Rotor | 110.3 | 1,125 | 81 | |
| Brush holder x Rectifier end frame | 1.8 | 18 | 16 in..lbf | |
| Rear end cover x Rectifier end frame | 4.6 | 47 | 41 in..lbf | |
| Generator x Cylinder block | Bolt | 39 | 400 | 29 |
| Nut 10 mm | 39 | 440 | 29 | |
| Nut 8 mm | 15.5 | 158 | 11 | |
Torque Specifications - Charging
| Part tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| Drain plug x Oil pan | 20 | 204 | 15 | |
| Overflow plug x Oil pan | 20 | 204 | 15 | |
| Refill plug x Transmission case | 39 | 400 | 29 | |
| No.1 vehicle speed sensor | A750E | 9.8 | 100 | 86 in..lbf |
| A750F | 11.5 | 117 | 8 | |
| Speed sensor NT x Automatic transmission | 5.4 | 55 | 48 in..lbf | |
| Speed sensor SP2 x Automatic transmission | 5.4 | 55 | 48 in..lbf | |
| Transmission wire set bolt x Automatic transmission | 5.4 | 55 | 48 in..lbf | |
| Transmission wire clamp x Valve body | A | 11 | 112 | 8 |
| B | 10 | 100 | 7 | |
| Oil pan x Transmission case | 4.4 | 45 | 39 in..lbf | |
| Park/neutral position switch | Bolt | 13 | 130 | 10 |
| Nut | 6.9 | 70 | 61 in..lbf | |
| Shift solenoid valve S1 x Valve body | 6.4 | 65 | 56 in..lbf | |
| Shift solenoid valve S2 x Valve body | 10 | 102 | 7 | |
| Shift solenoid valve SR x Valve body | 6.4 | 65 | 57 in..lbf | |
| Shift solenoid valve SLU, SL2 x Valve body | 6.4 | 65 | 57 in..lbf | |
| Shift solenoid valve SLT, SL1 x Valve body | 6.4 | 65 | 57 in..lbf | |
| Valve body x Transmission case | 11 | 112 | 8 | |
| Oil strainer x Valve body | 10 | 100 | 7 | |
| Parking lock pawl bracket x Transmission case | 7.4 | 75 | 65 in..lbf | |
| Oil cooler x Body | 11 | 110 | 8 | |
| Transmission oil cooler bracket x Oil cooler | 4.9 | 50 | 43 in..lbf | |
| Oil cooler tube clamp x Body | 5.0 | 50 | 48 in..lbf | |
| Shift lever x Shift lever housing | 18 | 180 | 13 | |
| Shift lever housing x Steering column assemby | 12 | 120 | 9 | |
| Parking lock cable No. 1 x Shift lever housing | 2.9 | 29 | 25 in..lbf | |
| Parking lock cable No. 2 x Column upper bracket | 2.2 | 23 | 19 in..lbf | |
| Parking lock cable housing x Steering column assembly | 10.5 | 110 | 8 | |
| Front suspension member bracket x Body | 33 | 336 | 24 | |
| Heat insulator | 16 | 164 | 12 | |
| Shift control cable x Transmission | 14.5 | 148 | 11 | |
| Shift control cable bracket x Transmission | 19.5 | 199 | 14 | |
| Oil cooler pipe clamp x Transmission | 12 | 122 | 9 | |
| Oil cooler pipe x Transmission | 34 | 346 | 25 | |
| Stabilizer bar | 37 | 377 | 27 | |
| Rear end plate x Transmission | 18 | 185 | 13 | |
| Torque converter clutch x Drive plate | 48 | 490 | 35 | |
| Engine rear mounting insulator x Crossmember | 18 | 185 | 13 | |
| Crossmember x Frame | 72 | 734 | 53 | |
| Engine rear mounting insulator x Extension housing | 65 | 660 | 48 | |
| Automatic transmission x Engine | 17 mm head | 71 | 720 | 53 |
| 14 mm head | 37 | 380 | 27 | |
Torque Specifications - Automatic Transmission (A750E, A750F)
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Transfer at Transfer adaptor | 24 | 245 | 18 |
| Engine rear mounting at Transmission | 65 | 660 | 48 |
| Crossmember at Frame | 72 | 730 | 53 |
| Engine rear mounting at Crossmember | 18 | 185 | 13 |
| Heat insulator at Crossmember | 16 | 164 | 12 |
| Front suspension member bracket at Crossmember | 33 | 336 | 24 |
| Filler plug at Transfer | 37 | 377 | 27 |
| Rear propeller shaft at Rear differential | 88 | 897 | 65 |
| Rear propeller shaft at Transfer | 88 | 897 | 65 |
| Protector at Transfer | 18 | 185 | 13 |
| Front propeller shaft at Front differential | 74 | 750 | 54 |
| Front propeller shaft at Transfer | 88 | 897 | 65 |
| Front exhaust pipe at Exhaust manifold | 62 | 630 | 46 |
| Front exhaust pipe at Center exhaust pipe | 48 | 490 | 35 |
| Transfer case cover at Transfer front case | 18 | 184 | 13 |
| Case plug at Transfer front case | 18.6 | 190 | 14 |
| Front bearing retainer at Transfer front case | 11.5 | 119 | 8 |
| Front output shaft companion flange lock nut | 118 | 1,203 | 87 |
| Oil pump at Front case | 7.5 | 69 | 66 in.lbf |
| Oil separator at Front case | 7.5 | 69 | 66 in.lbf |
| Transfer shift actuator at Transfer case rear | 20 | 204 | 15 |
| Front case at Transfer case rear | 28 | 286 | 21 |
| Shift shaft stopper | 19 | 194 | 14 |
| Drain and filler plug | 37 | 377 | 27 |
| Transfer extension housing at Transfer case rear | 12 | 122 | 9 |
| Rear output shaft companion flange lock nut | 118 | 1,203 | 87 |
| Gear shift fork | 24 | 245 | 18 |
TORQUE SPECIFICATIONS
| Part tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| Propeller shaft assembly (2WD) | ||||
| Propeller shaft x Differential | 88 | 897 | 65 | |
| Propeller shaft assembly (4WD) | ||||
| Front propeller shaft x Front differential | 74 | 750 | 54 | |
| Front propeller shaft x Transfer | 88 | 897 | 65 | |
| Rear propeller shaft x Rear differential | 88 | 897 | 65 | |
| Rear propeller shaft x Transfer | 88 | 897 | 65 | |
Torque Specifications - Propeller Shaft
| Part tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| TIRE PRESSURE MONITOR RECEIVER | ||||
| Tire pressure monitor receiver set bolt | 7.5 | 76 | 66 in..lbf | |
| TIRE PRESSURE MONITOR VALVE | ||||
| Tire pressure monitor valve set nut | 4.0 | 41 | 35 in..lbf | |
| FRONT AXLE | ||||
| Hub nut | 110 | 1,150 | 83 | |
| Tie rod end lock nut | 55 | 560 | 41 | |
| Steering knuckle x Brake caliper | 80 | 820 | 59 | |
| Steering knuckle x Dust cover | 123 | 1,250 | 90 | |
| Drive shaft lock nut | 18 | 185 | 13 | |
| Upper suspension arm x Upper ball joint | 235 | 2,400 | 173 | |
| Brake line clamp x Steering knuckle | 105 | 1,100 | 77 | |
| ABS speed sensor x Steering knuckle | 28 | 285 | 21 | |
| ABS speed sensor wire harness clamp x Steering knuckle | 8.0 | 82 | 71 in..lbf | |
| ABS speed sensor wire harness clamp x Upper suspension arm | 8.0 | 82 | 71 in..lbf | |
| FRONT DIFFERENTIAL | ||||
| Drive pinion x companion flange | See page SA-43 | |||
| Differential front mounting cushion x Chassis frame | 137 | 1,400 | 101 | |
| Differential rear mounting cushion x Chassis frame | 87 | 890 | 64 | |
| Differential front mounting cushion x Differential | 157 | 1,600 | 116 | |
| Differential rear mounting cushion x Differential | 108 | 1,100 | 80 | |
| Ring gear x Differential case | 97 | 985 | 71 | |
| Differential carrier x Differential tube | 78 | 800 | 58 | |
| Differential carrier x Side bearing retainer | 69 | 700 | 51 | |
| Differential x Front propeller shaft | 74 | 750 | 54 | |
| A.D.D. clutch case x Differential | 78 | 800 | 58 | |
| A.D.D. clutch case x Differential tube | 78 | 800 | 58 | |
| A.D.D. actuatorx A.D.D. clutch case | 21 | 210 | 15 | |
| Tube with wire harness assembly clamp x Differential carrier | 13 | 130 | 9 | |
| Drain plug | 65 | 660 | 48 | |
| Filler plug | 39 | 400 | 29 | |
| FRONT SUSPENSION | ||||
| Suspension support x Chassis frame | 64 | 650 | 47 | |
| Piston rod x Suspension support | 25 | 250 | 18 | |
| Lower suspension arm x Shock absorber | 135 | 1,400 | 100 | |
| Upper suspension arm x Chassis frame | 98 | 1,000 | 72 | |
| Lower suspension arm x Chassis frame | 130 | 1,325 | 96 | |
| Lower suspension arm x Lower ball joint | 159 | 1,621 | 117 | |
| Power steering gear | Left side nut | 130 | 1,350 | 96 |
| Center bolt | 165 | 1,700 | 122 | |
| Right side bolt and nut | 165 | 1,700 | 122 | |
| Tie rod end x Lower ball joint | 91 | 930 | 67 | |
| No. 1, No. 2 spring bumper | 31 (23) | 315 (235) | 23 (17) | |
| Lower suspension arm x Stabilizer bar link | 69 | 700 | 51 | |
| Stabilizer bar x Stabilizer bar link | 19 | 190 | 14 | |
| Stabilizer bar bracket x Chassis frame | 37 | 377 | 27 | |
| REAR AXLE | ||||
| Hub nut | 110 | 1,122 | 83 | |
| Backing plate x Brake caliper | 105 | 1,070 | 77 | |
| Parking brake cable x Backing plate | 8.0 | 82 | 71 in..lbf | |
| Axle housing x Backing plate | 122 | 1,244 | 90 | |
| Brake line union nut | 15.5 | 158 | 11 | |
| ABS speed sensor x Axle housing | 8.0 | 82 | 71 in..lbf | |
| REAR DIFFERENTIAL | ||||
| Differential x Propeller shaft | 74 | 750 | 56 | |
| Drive pinion x Companion flange | See page SA-113 | |||
| Companion flange x Stud bolt | 10 | 102 | 7.4 | |
| Differential carrier x Axle housing | 73 | 740 | 54 | |
| Differential carrier x Bearing cap | 113 | 1,150 | 83 | |
| Differential case x Ring gear | 125 | 1,270 | 92 | |
| Drain plug | 49 | 500 | 36 | |
| Filler plug | 49 | 500 | 36 | |
| REAR SUSPENSION | ||||
| Shock absorber x Chassis frame | 58 | 591 | 43 | |
| Shock absorber x Axle housing | 87 | 887 | 64 | |
| REAR LATERAL CONTROL ROD | ||||
| Lateral control rod x Chassis frame | 140 | 1,428 | 103 | |
| Lateral control rod x Axle housing | 130 | 1,326 | 96 | |
| REAR UPPER AND LOWER CONTROL ARM | ||||
| Upper control arm x Chassis frame | 140 | 1,428 | 103 | |
| Upper control arm x Axle housing | 140 | 1,428 | 103 | |
| Upper control arm x Brake line bracket | 28 | 286 | 21 | |
| Lower control arm x Chassis frame | 130 | 1,326 | 96 | |
| Lower control arm x Axle housing | 130 | 1,326 | 96 | |
| Lower control arm x Parking brake cable bracket | 26 | 265 | 19 | |
| REAR STABILIZER BAR | ||||
| Bracket x Axle housing | 37 | 377 | 27 | |
| Stabilizer bar link x Chassis frame | 69 | 704 | 51 | |
| Stabilizer barx Stabilizer bar link | 69 | 704 | 51 | |
| HEIGHT CONTROL COMPRESSOR AND DRYER | ||||
| Height control compressor x Bracket | 29 | 300 | 21 | |
| Height control filter x Height control compressor | 6.4 | 65 | 57 in..lbf | |
| Bracket x Body | 29 | 300 | 21 | |
| HEIGHT CONTROL VALVE | ||||
| Height control set bolt | 29 | 300 | 21 | |
| REAR HEIGHT CONTROL SENSOR | ||||
| Rear height control sensor set nut | 29 | 300 | 21 | |
| Rear height control link set nut | 5.4 | 55 | 48 in..lbf | |
Torque Specifications - Suspension And Axle
| Part tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| Bleeder plug | 11 | 110 | 8 | |
| Master cylinder x Reservoir | 1.5 | 15 | 13 in..lbf | |
| Master cylinder x Brake booster | 25 | 250 | 18 | |
| Master cylinder x Master cylinder pressure sensor | 25 | 250 | 18 | |
| Brake booster clevis lock nut | 25 | 250 | 18 | |
| Brake booster x Brake booster bracket | 25 | 250 | 18 | |
| Brake booster x Pedal bracket | 13 | 130 | 9 | |
| Brake pedal x Pedal bracket | 34 | 350 | 25 | |
| Stop light switch lock nut | 25 | 260 | 19 | |
| Parking brake pedal assembly x Pedal bracket | 32 | 320 | 23 | |
| Parking brake pedal assembly x Body | 13 | 130 | 9 | |
| Brake line union nut | 10 mm | 15 | 155 | 11 |
| 12 mm | 19.5 | 195 | 14 | |
| Front disc brake caliper x Steering knuckle | 123 | 1,250 | 90 | |
| Rear disc brake caliper installation bolt | 88 | 900 | 65 | |
| Rear disc brake caliper x Flexible hose | 31 | 320 | 23 | |
| Rear disc brake torque plate x Backing plate | 105 | 1,070 | 77 | |
| Actuator bracket x Body | 11 | 112 | 8 | |
| Actuator bracket x Actuator assembly | 9.5 | 97 | 84 in..lbf | |
| Actuator x Skid control ECU | 1.8 | 18 | 16 in..lbf | |
| Speed sensor installation bolt | 8.0 | 82 | 71 in..lbf | |
| Front speed sensor harness x Steering knuckle | 8.0 | 82 | 71 in..lbf | |
| Front speed sensor harness x Upper arm | 8.0 | 82 | 71 in..lbf | |
| Front speed sensor harness x Coil support | 8.0 | 82 | 71 in..lbf | |
Torque Specifications - Brake
| Part tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| TILT STEERING COLUMN | ||||
| Steering wheel pad set screw (Torx screw) | 8.8 | 90 | 78 in..lbf | |
| Steering wheel set nut | 50 | 510 | 37 | |
| Control valve shaft x No. 2 intermediate shaft assembly | 35 | 360 | 26 | |
| No. 2 intermediate shaft assembly x Sliding yoke | 35 | 360 | 26 | |
| No. 2 universal joint assembly x Sliding yoke | 35 | 360 | 26 | |
| No. 2 universal joint assembly x Main shaft assembly | 35 | 360 | 26 | |
| Steering column assembly set nut | 26 | 260 | 19 | |
| Column hole cover No. 2 set bolt | 8.0 | 82 | 71 in..lbf | |
| Shift lever set bolt | 18 | 180 | 13 | |
| Shift lever housing x Column tube assembly | 12 | 120 | 9 | |
| Turn signal bracket x Steering column housing | 7.5 | 75 | 65 in..lbf | |
| Tilt lever lock shaft | 9.0 | 90 | 78 in..lbf | |
| PS VANF PUMP | ||||
| Union bolt x Pressure feed tube | 46.5 | 475 | 34 | |
| PS vane pump assembly set stud bolt | 22 | 220 | 16 | |
| PS vane pump assembly set bolt and nut | 44 | 450 | 33 | |
| Suction port union set bolt | 13 | 130 | 9 | |
| Pressure port union | 83 | 850 | 61 | |
| Front housing x Rear housing | 24 | 240 | 17 | |
| PS GEAR | ||||
| Turn pressure tube union nut | 13 (15) | 135 (150) | 10 (11) | |
| Tie rod end lock nut | 55 | 560 | 41 | |
| Rack x Rack end | 76 (103) | 770 (1,050) | 56 (76) | |
| Rack guide spring cap lock nut | 44 (59) | 450 (600) | 32 (43) | |
| Rack housing cap | 59 | 600 | 43 | |
| Self-locking nut | 25 | 250 | 18 | |
| Control valve housing set bolt | 18 | 185 | 13 | |
| PS gear assembly set bolt | 165 | 1,700 | 123 | |
| PS gear assembly set bolt and nut | 130 | 1,350 | 96 | |
| Bracket x Body | Bolt and nut | 165 | 1,700 | 123 |
| Bracket x Body | Stud bolt | 20 | 200 | 15 |
| Pressure feed and return tubes x Control valve housing | 22 (25) | 227 (250) | 16 (18) | |
| No. 2 intermediate shaft assembly x No. 2 universal joint assembly | 35 | 360 | 26 | |
| Control valve shaft x No. 2 intermediate shaft assembly | 35 | 360 | 26 | |
| Tie rod end x Lower arm | 91 | 930 | 67 | |
| ( ) : For use without SST | ||||
Torque Specifications - Steering
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Steering wheel set nut | 50 | 510 | 37 |
| Steering wheel pad set screw (Torx screw) | 8.8 | 90 | 78 in.lbf |
| Front passenger airbag assembly at Instrument panel | 5.0 | 51 | 44 in.lbf |
| Front passenger airbag assembly at Instrument panel reinforcement | 20 | 204 | 15 |
| Front seat at Body | 37 | 377 | 27 |
| Front seat inner belt at Front seat | 41 | 428 | 31 |
| Seatback cover at Seatback frame | 5.5 | 56 | 49 in.lbf |
| Armrest at Seatback frame | 37 | 377 | 27 |
| Curtain shield airbag assembly at Body | 9.8 | 100 | 7 |
| Airbag sensor assembly at Body | 17.5 | 179 | 13 |
| Front airbag sensor at Body | 17.5 | 179 | 13 |
| Side airbag sensor assembly at Body | 17.5 | 179 | 13 |
| Curtain shield airbag sensor assembly at Body | 17.5 | 179 | 13 |
| Seat position sensor assembly at Body | 8.0 | 82 | 71 in.lbf |
TORQUE SPECIFICATIONS
| Part tightened | N.m | Kgf.cm | Ft.lbf | ||
|---|---|---|---|---|---|
| FRONT BUMPER | |||||
| Side support x Body | 3.0 | 30 | 27 in..lbf | ||
| Front bumper reinforcement x Body | 50 | 510 | 37 | ||
| Front bumper cover x Body | 7.0 | 71 | 62 in..lbf | ||
| REAR BUMPER | |||||
| Rear bumper reinforcement x Body | 95 | 970 | 70 | ||
| Rear bumper side support x Rear bumper reinforcement | 19 | 195 | 14 | ||
| Back step reinforcement x Rear bumper side support | 19 | 195 | 14 | ||
| Rear bumper cover x Body | 7.0 | 71 | 62 in..lbf | ||
| Rear bumper cover x Rear bumper extension | 5.0 | 50 | 43 in..lbf | ||
| HOOD | |||||
| Hood hinge x Hood | 13 | 133 | 10 | ||
| Hood lock x Hood | 7.8 | 80 | 69 in..lbf | ||
| HOOD SUPPORT | |||||
| Hood support x Body | 22 | 224 | 16 | ||
| Hood support x Hood | 22 | 224 | 16 | ||
| FRONT DOOR | |||||
| Door hinge x Body | 23 | 235 | 17 | ||
| Door hinge x Door panel | 23 | 235 | 17 | ||
| Door check x Door panel | 30 | 306 | 22 | ||
| Door lock striker x Body | 23 | 235 | 17 | ||
| Outside rear view mirror x Door panel | 8.0 | 82 | 71 in..lbf | ||
| Door glass x Window regulator sub-assembly | 8.0 | 82 | 71 in..lbf | ||
| Window regulator sub-assembly x Door panel | 8.0 | 82 | 71 in..lbf | ||
| Door lock x Door panel | 5.0 | 51 | 44 in..lbf | ||
| Outside handle with lock cylinder x Door panel | 5.5 | 56 | 49 in..lbf | ||
| Outside handle x Lock cylinder | 5.5 | 56 | 49 in..lbf | ||
| REAR DOOR | |||||
| Door hinge x Body | 23 | 230 | 17 | ||
| Door hinge x Door panel | 23 | 230 | 17 | ||
| Door check x Door panel | 30 | 306 | 22 | ||
| Door lock striker x Body | 23 | 230 | 17 | ||
| Window regulator x Door panel | 8.0 | 82 | 71 in..lbf | ||
| Door lock x Door panel | Bolt | 5.5 | 56 | 49 in..lbf | |
| Door lock x Door panel | Screw | 5.0 | 51 | 44 in..lbf | |
| Outside handle x Door panel | 5.5 | 56 | 49 in..lbf | ||
| BACK DOOR | |||||
| Back door hinge x Body | 19.5 | 199 | 14.4 | ||
| Back door hinge x Door panel | 19.5 | 199 | 14.4 | ||
| Door lock striker x Body | 27 | 275.5 | 19.9 | ||
| Guide bracket x Door panel | 8.0 | 82 | 71 in..lbf | ||
| Back door glass x Door panel | 8.0 | 82 | 71 in..lbf | ||
| Power window regulator x Door panel | 5.5 | 56 | 49 in..lbf | ||
| Back door lock x Door panel | 8.0 | 82 | 71 in..lbf | ||
| FRONT WIPER AND WASHER | |||||
| Wiper link x Body | 5.5 | 56 | 49 in..lbf | ||
| Wiper motor x Wiper link | 5.5 | 56 | 49 in..lbf | ||
| Wiper arm x Wiper link | 20 | 204 | 15 | ||
| REAR WIPER AND WASHER | |||||
| Rear wiper motor x Body | 5.5 | 56 | 49 in..lbf | ||
| Wiper arm x Rear wiper motor | 5.5 | 56 | 49 in..lbf | ||
| BODY OUTSIDE MOULDING | |||||
| Rear bumper cover x Rear bumper extension | 5.0 | 50 | 43 in..lbf | ||
| WINDSHIELD | |||||
| Inner rear view mirror set torx screw | 2.5 | 25 | 22 in..lbf | ||
| SLIDING ROOF | |||||
| Sliding roof housing x Body | 5.5 | 56 | 49 in..lbf | ||
| INSTRUMENT PANEL | |||||
| Front passenger airbag assembly x Instrument panel | 5.0 | 51 | 44 in..lbf | ||
| Front passenger airbag assembly x Instrument panel reinforcement | 20 | 204 | 15 | ||
| Steering wheel x Steering wheel pad | 8.8 | 90 | 78 in..lbf | ||
| Box panel sub-assembly x Floor panel | 40 | 408 | 30 | ||
| FRONT SEAT (Power Adjuster Type) | |||||
| W/ Side airbag: Seatback cover bracket x Seat frame assembly | 5.5 | 56 | 49 in..lbf | ||
| Armrest x Seat frame assembly | 37 | 380 | 27 | ||
| Front seat x Body | 37 | 380 | 27 | ||
| FRONT SEAT (Manual Adjuster Type) | |||||
| W/ Side airbag: Seatback cover bracket x Seat frame assembly | 5.5 | 56 | 49 in..lbf | ||
| Armrest x Seat frame assembly | 37 | 380 | 27 | ||
| Front seat x Body | 37 | 380 | 27 | ||
| REAR NO.1 SEAT (Separate Type) | |||||
| Rear seat cushion hinge x Body | 37 | 380 | 27 | ||
| LH rear seat lock x Seat cushion frame | 43 | 440 | 32 | ||
| Rear seat reclining adjuster x Seat cushion frame | 43 | 440 | 32 | ||
| Rear seat reclining adjuster x Seatback frame | 43 | 440 | 32 | ||
| RH rear seat lock x Seat cushion frame | 64 | 653 | 47 | ||
| REAR NO. 1 SEAT (Split Type LH) | |||||
| Rear seat cushion hinge x Body | 43 | 440 | 32 | ||
| Rear No. 1 seat outer adjuster x Seat cushion frame | 43 | 440 | 32 | ||
| Rear No. 1 seat outer adjuster x Seatback frame | 43 | 440 | 32 | ||
| Rear No. 1 seat inner adjuster x Seat cushion frame | 43 | 440 | 32 | ||
| Rear No. 1 seat inner adjuster x Seatback frame | 42 | 430 | 31 | ||
| Rear seat shoulder belt guide x Seatback frame | 37 | 380 | 27 | ||
| REAR NO.1 SEAT (Split Type RH) | |||||
| Rear seat cushion hinge x Body | 37 | 380 | 27 | ||
| Rear seat lock x Seat cushion frame | 43 | 440 | 32 | ||
| Rear seat reclining adjuster x Seat cushion frame | 43 | 440 | 32 | ||
| Rear seat reclining adjuster x Seatback frame | 43 | 440 | 32 | ||
| REAR NO. 2 SEAT | |||||
| Seat adjuster x Seat cushion frame | 19 | 195 | 14 | ||
| No .2 seat reclining adjuster x Seat cushion frame | 43 | 440 | 32 | ||
| No. 2 seat reclining adjuster x Seatback frame | 43 | 440 | 32 | ||
| SEAT BELT | |||||
| Front seat outer belt shoulder anchor x Adjustable anchor | 42 | 430 | 32 | ||
| Front seat outer belt floor anchor x Body | 42 | 430 | 32 | ||
| Front seat outer belt retractor x Body | 42 | 430 | 32 | ||
| Adjustable anchor x Body | 42 | 430 | 32 | ||
| Front seat inner belt x Front seat | 42 | 430 | 32 | ||
| Rear No. 1 seat outer belt shoulder anchor x Adjustable anchor | 42 | 430 | 32 | ||
| Rear No. 1 seat outer belt floor anchor x Body | 42 | 430 | 32 | ||
| Rear No. 1 seat outer belt retractor x Body | Upper bolt | 8.5 | 87 | 76 in..lbf | |
| Rear No. 1 seat outer belt retractor x Body | Lower bolt | 42 | 430 | 32 | |
| Rear outer belt retractor x Rear No. 1 seat | 42 | 430 | 32 | ||
| Rear outer belt floor anchor x Rear seat lock | 42 | 430 | 32 | ||
| Rear No. 2 seat outer belt shoulder anchor x Body | 42 | 430 | 32 | ||
| Rear No. 2 seat outer belt floor anchor x Body | 42 | 430 | 32 | ||
| Rear No. 2 seat outer belt retractor x Body | Upper bolt | 8.5 | 87 | 76 in..lbf | |
| Rear No. 2 seat outer belt retractor x Body | Lower bolt | 42 | 430 | 32 | |
| Rear No.2 seat outer center belt x Body | 42 | 430 | 32 | ||
| Rear No. 2 inner belt x Rear No. 2 seat | 42 | 430 | 32 | ||
| SIDE STEP | |||||
| Side step bracket x Body | 19 | 195 | 14 | ||
| Step plate x Side step bracket | 4.9 | 50 | 43 in..lbf | ||
| ROOF RACK | |||||
| Front leg x Body | 11 | 115 | 8 | ||
| Center support x Body | 11 | 115 | 8 | ||
| Rear leg x Body | 11 | 115 | 8 | ||
| SPOILER | |||||
| Rear spoiler x Body | 12 | 120 | 8 | ||
BODY - TORQUE SPECIFICATIONS
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| REFRIGERANT LINE | |||
| Receiver at Liquid tube | 5.4 | 55 | 48 in.lbf |
| Condenser at Discharge hose | 5.4 | 55 | 48 in.lbf |
| Condenser at Liquid tube | 5.4 | 55 | 48 in.lbf |
| Compressor at Discharge hose | 10 | 100 | 7 |
| Compressor at Suction hose | 10 | 100 | 7 |
| Liquid and suction tube (Nut) | 5.4 | 55 | 48 in.lbf |
| Liquid and suction tube at Rear A/C unit | 5.4 | 55 | 48 in.lbf |
| COOLING UNIT | |||
| Evaporator at Expansion valve at Liquid and suction tube | 3.5 | 36 | 31 in.lbf |
| REAR A/C UNIT | |||
| Tube and accessory at Evaporator | 5.4 | 55 | 31 in.lbf |
| Tube and accessory at Expansion valve | 22 | 235 | 16 |
| Expansion valve at Liquid tube | 13 | 135 | 10 |
| COMPRESSOR AND MAGNETIC CLUTCH | |||
| Compressor at Engine (Bolt) | 47 | 480 | 35 |
| Compressor at Bracket at Engine (Nut) | 25 | 255 | 18 |
| Pressure plate at Rotor at Compressor | 18 | 184 | 12.3 |
| PRESSURE SWITCH | |||
| Pressure switch at Liquid tube | 10 | 100 | 7 |
| WATER TEMPERATURE SWITCH | |||
| Water temperature switch at Radiator | 7.4 | 75 | 65 in.lbf |
TORQUE SPECIFICATIONS