Air Conditioning: Overhaul Toyota Sequoia I рестайлинг

REASSEMBLY

Reassembly is in the reverse order of disassembly (See DISASSEMBLY ).

Reassembly is in the reverse order of disassembly (See DISASSEMBLY ).

Reassembly is in the reverse order of disassembly (See DISASSEMBLY ).

Reassembly is in the reverse order of disassembly (See DISASSEMBLY ).

AFTER REASSEMBLY, CHECK MAGNETIC CLUTCH CLEARANCE

1. Set the dial indicator to the pressure plate of the magnetic clutch.
2. Connect the magnetic clutch lead wire to the positive (+) terminal of the battery.
3. Check the clearance between the pressure plate and rotor when connecting the negative (-) terminal to the battery.

Standard clearance

0.35 to 0.50 mm (0.014 to 0.024 in.)

If the clearance is not within the standard range, adjust the clearance using shims to obtain the standard clearance.

Scheme 279

1. Standard thickness
2. 0.1 mm (0.004 in.)
3. 0.3 mm (0.012 in.)
4. 0.5 mm (0.020in.)

Reassembly is in the reverse order of disassembly (See DISASSEMBLY ).

Reassembly is in the reverse order of disassembly (See DISASSEMBLY ).

Reassembly is in the reverse order of disassembly (See DISASSEMBLY ).