SPECIFICATIONS
| Application | Specification | ||
|---|---|---|---|
| Compressor Type | (1) | ||
| Compressor Belt Tension | (2) | ||
| Compressor Oil Capacity (3) | (1) | ||
| Condenser Oil Capacity (3) | 1.4 ozs. | ||
| Evaporator Oil Capacity (3) | 1.4 ozs. | ||
| Refrigerant (R-134a) Capacity | |||
| With Only Front A/C System | 24.7-28.2 ozs | ||
| With Front & Rear A/C Systems | 35.3-38.8 ozs. | ||
| System Operating Pressures (4) | |||
| With Only Front A/C System | |||
| High Side | 228-256 psi (16-18 kg/cm 2 ) | ||
| Low Side | 21-36 psi (1.5-2.5 kg/cm 2 ) | ||
| With Front & Rear A/C Systems | |||
| High Side | 270-299 psi (19-21 kg/cm 2 ) | ||
| Low Side | 36-50 psi (2.5-3.5 kg/cm 2 ) | ||
| (1) Information is not available from manufacturer. (2) Automatic belt tensioner is used. Adjustment is not required. Belt must be replaced if arrow mark on automatic belt tensioner is not within area "A". see scheme 156 (3) Use ND-OIL 8 refrigerant oil or equivalent. (4) With ambient temperature at 86-95°F (30-35°C) at air inlet with switch in RECIRC position, engine at 2000 RPM, blower switch in HI position and temperature control dial in COOL position. | |||
| (1) | Information is not available from manufacturer. |
| (2) | Automatic belt tensioner is used. Adjustment is not required. Belt must be replaced if arrow mark on automatic belt tensioner is not within area "A". see scheme 156 |
| (3) | Use ND-OIL 8 refrigerant oil or equivalent. |
| (4) | With ambient temperature at 86-95°F (30-35°C) at air inlet with switch in RECIRC position, engine at 2000 RPM, blower switch in HI position and temperature control dial in COOL position. |
SPECIFICATIONS
Scheme 1
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Clutch Pressure Plate-To-Compressor Shaft Bolt | 13 (18) | |
| Compressor Mounting Bolt/Nut | ||
| Bolt | 35 (47) | |
| Nut | 18 (24) | |
| Passenger's Side Air Bag-To-Instrument Panel Reinforcement Bolt | 15 (20) | |
| Steering Wheel Nut | 37 (51) | |
| Tube & Accessory-To-Expansion Valve Nut For Rear A/C Cooling Unit | 16 (22) | |
| INCH Lbs. (N.m) | ||
| Driver's Side Air Bag Torx Screw | 78 (8.8) | |
| Expansion Valve Bolt For Front A/C Cooling Unit | 31 (3.5) | |
| Liquid Tube-To-Expansion Valve Nut For Rear A/C Cooling Unit | 89 (10.1) | |
| Passenger's Side Air Bag-To-Instrument Panel Bolt | 44 (5.0) | |
| Pressure Switch | 89 (10.1) | |
| Refrigerant Line-To-Compressor Bolt | 89 (10.1) | |
| Refrigerant Line-To-Condenser Bolt | 48 (5.4) | |
| Refrigerant Line-To-Rear A/C Cooling Unit Nut | 48 (5.4) | |
| Refrigerant Line-To-Receiver Bolt | 48 (5.4) | |
TORQUE SPECIFICATIONS