| The monitor will run whenever the following DTCs are not present | None |
|---|---|
| Either of the following conditions A and B are met | |
| Condition A | |
| Time after engine start | 250 to 500 sec. |
| Vehicle speed | Within 90 km/h (56 mph) |
| Battery voltage | 10.5 V or more |
| Pass or Fail detection in this driving cycle | None |
| Condition B | |
| Time after engine start | 500 sec. or more |
| Vehicle speed | 40 km/h (25 mph) or more |
| Battery voltage | 10.5 V or more |
| Pass or Fail detection in this driving cycle | None |
TYPICAL ENABLING CONDITIONS