CAPACITIES
| CAUTION | Some transaxles may require that differential be filled separately from transaxle. A separate quantity of lubricant is required for differential. See appropriate FLUID CAPACITIES table. |
| WARNING | On Prius, read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
FLUID CAPACITIES (AVALON)
| Application | (1) Quantity |
|---|
| Automatic Transaxle (Dexron-III) |
| Drain & Refill | 5.0 Qts. (4.7L) |
| Dry Fill | 8.5 Qts. (8.0L) |
| Cooling System (Includes Heater) | 9.5 Qts. (9.0L) |
| Crankcase (Includes Filter) (2) | 5.0 Qts. (4.7L) |
| Power Steering Fluid (Dexron-III) | .85 Qt. (.80L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
FLUID CAPACITIES (AVALON)
FLUID CAPACITIES (CAMRY & CAMRY SOLARA)
| Application | (1) Quantity |
|---|
| Automatic Transaxle (Dexron-III) |
| 2.2L 4-Cyl. (3) |
| Drain & Refill | 2.6 Qts. (2.5L) |
| Dry Fill | 5.9 Qts. (5.6L) |
| 3.0L V6 |
| Drain & Refill | 5.0 Qts. (4.7L) |
| Dry Fill | 8.5 Qts. (8.0L) |
| Cooling System (Includes Heater) |
| 2.2L 4-Cyl. (3) | 7.3 Qts. (6.9L) |
| 3.0L V6 | 9.3 Qts. (8.8L) |
| Crankcase (Includes Filter) (2) |
| 2.2L 4-Cyl. (3) | 3.8 Qts. (3.6L) |
| 3.0L V6 | 5.0 Qts. (4.7L) |
| Manual Transaxle (SAE 75W-90/API GL-5) |
| 2.2L 4-Cyl. (3) | 2.3 Qts. (2.2L) |
| 3.0L V6 | 4.4 Qts. (4.2L) |
| Differential (Dexron-III) (4) |
| 2.2L 4-Cyl. A/T (3) | 1.7 Qts. (1.6L) |
| Power Steering Fluid (Dexron-III) | .85 Qt. (.80L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. (3) On Camry models, specification applies to both gasoline and Compressed Natural Gas (CNG) models. (4) On M/T, differential fluid is included in transaxle capacity. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
| (3) | On Camry models, specification applies to both gasoline and Compressed Natural Gas (CNG) models. |
| (4) | On M/T, differential fluid is included in transaxle capacity. |
FLUID CAPACITIES (CAMRY & CAMRY SOLARA)
FLUID CAPACITIES (CELICA)
| Application | (1) Quantity |
|---|
| Automatic Transaxle (Toyota Type "T-IV" ATF) |
| 1.8L (1ZZ-FE) |
| Drain & Refill | 3.1 Qts. (2.9L) |
| Dry Refill | 7.3 Qts. (6.9L) |
| 1.8L (2ZZ-GE) |
| Drain & Refill | 4.3 Qts. (4.1L) |
| Dry Refill | 8.0 Qts. (7.6L) |
| Cooling System (Includes Heater) |
| 1.8L (1ZZ-FE) |
| A/T | 5.9 Qts. (5.6L) |
| M/T | 6.0 Qts. (5.7L) |
| 1.8L (2ZZ-GE) |
| A/T | 6.1 Qts. (5.8L) |
| M/T | 6.2 Qts. (5.9L) |
| Crankcase (Includes Filter) (2) |
| 1.8L (1ZZ-FE) | 3.9 Qts. (3.7L) |
| 1.8L (2ZZ-GE) | 4.8 Qts. (4.5L) |
| Manual Transaxle (SAE 75W-90/API GL-5) |
| 1.8L (1ZZ-FE) | 2.0 Qts. (1.9L) |
| 1.8L (2ZZ-GE) | 2.4 Qts. (2.3L) |
| Power Steering Fluid (Dexron-III) | 1.1 Qt. (1.0L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
FLUID CAPACITIES (CELICA)
FLUID CAPACITIES (COROLLA)
| Application | (1) Quantity |
|---|
| Automatic Transaxle |
| 3-Speed (Dexron-III) |
| Drain & Refill | 2.6 Qts. (2.5L) |
| Dry Refill | 5.8 Qts. (5.5L) |
| 4-Speed (Dexron-III) |
| Drain & Refill | 3.3 Qts. (3.1L) |
| Dry Refill | 8.0 Qts. (7.6L) |
| Cooling System (Includes Heater) |
| A/T | 6.0 Qts. (5.7L) |
| M/T | 6.1 Qts. (5.8L) |
| Crankcase (Includes Filter) (2) | 3.9 Qts. (3.7L) |
| Manual Transaxle (SAE 75W-90/API GL-5) | 2.0 Qts. (1.9L) |
| Differential (3) |
| 3-Speed A/T (Dexron-III) | 1.5 Qts. (1.4L) |
| Power Steering Fluid (Dexron-III) | .85 Qt. (.80L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. (3) On 4-speed A/T and all M/T, differential fluid is included in transaxle capacity. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
| (3) | On 4-speed A/T and all M/T, differential fluid is included in transaxle capacity. |
FLUID CAPACITIES (COROLLA)
FLUID CAPACITIES (ECHO)
| Application | (1) Quantity |
|---|
| Automatic Transaxle (Toyota Type "T-IV" ATF) |
| Drain & Refill | 3.1 Qts. (2.9L) |
| Dry Fill | 7.3 Qts. (6.9L) |
| Cooling System (Includes Heater) |
| A/T | 4.5 Qts. (4.3L) |
| M/T | 4.7 Qts. (4.4L) |
| Crankcase (Includes Filter) (2) | 3.9 Qts. (3.7L) |
| Manual Transaxle (SAE 75W-90/API GL-5) | 2.0 Qts. (1.9L) |
| Power Steering Fluid (Dexron-III) | .74 Qt. (.70L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
FLUID CAPACITIES (HIGHLANDER)
| Application | (1) Quantity |
|---|
| Automatic Transaxle (Toyota Type "T-IV" ATF) |
| 2WD |
| 2.4L 4-Cyl. |
| Drain & Refill | 3.5 Qts. (3.3L) |
| Dry Refill |
| With Air Cooled Oil Cooler | 9.5 Qts. (9.0L) |
| Without Air Cooled Oil Cooler | 9.1 Qts. (8.6L) |
| 3.0 V6 |
| Drain & Refill | 3.3 Qts. (3.1L) |
| Dry Refill |
| With Air Cooled Oil Cooler | 9.3 Qts. (8.8L) |
| Without Air Cooled Oil Cooler | 8.9 Qts. (8.4L) |
| 4WD |
| Drain & Refill | 4.1 Qts. (3.9L) |
| Dry Refill |
| With Air Cooled Oil Cooler | 9.2 Qts. (8.7L) |
| Without Air Cooled Oil Cooler | 8.8 Qts. (8.3L) |
| Cooling System (Includes Heater) |
| 2.4L 4-Cyl. | 6.8 Qts. (6.4L) |
| 3.0L V6 | 9.9 Qts. (9.4L) |
| Crankcase (Includes Filter) (2) |
| 2.4L 4-Cyl. | 4.0 Qts. (3.8L) |
| 3.0L V6 | 5.0 Qts. (4.7L) |
| Differential (SAE 80W-90/API GL-5) |
| 4WD |
| Rear Axle | 1.0 Qt. (.9L) |
| Power Steering Fluid (Dexron-III) |
| 2.4L 4-Cyl. |
| With Towing Package | 1.0 Qt. (.9L) |
| Without Towing Package | .85 Qt. (.80L) |
| 3.0L V6 | .85 Qt. (.80L) |
| Transfer Case (SAE 80W-90/API GL-5) | 1.0 Qt. (.9L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
FLUID CAPACITIES (HIGHLANDER)
FLUID CAPACITIES (LAND CRUISER)
| Application | (1) Quantity |
|---|
| Automatic Transmission (Dexron-III) |
| Drain & Refill | 3.7 Qts. (3.5L) |
| Dry Refill | 12.4 Qts. (11.7L) |
| Cooling System (Includes Heater) |
| With Front Heater Only | 15.6 Qts. (14.8L) |
| With Front & Rear Heater | 16.2 Qts. (15.3L) |
| Crankcase (Includes Filter) (2) | 7.2 Qts. (6.8L) |
| Differential |
| Front Axle (SAE 80W-90/API GL-5) | 1.8 Qts. (1.7L) |
| Rear Axle |
| With Limited Slip Differential (LSD) (Hypoid Gear Oil LSD SAE 80W-90/API GL-5) | 3.5 Qts. (3.3L) |
| With Rear Differential Lock (SAE 80W-90/API GL-5) | 3.4 Qts. (3.2L) |
| Without Rear Differential Lock (SAE 80W-90/API GL-5) | 3.5 Qts. (3.3L) |
| Power Steering Fluid (Dexron-III) | .85 Qt. (.80L) |
| Transfer Case (SAE 75W-90/API GL-5) | 1.4 Qts. (1.3L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
FLUID CAPACITIES (LAND CRUISER)
FLUID CAPACITIES (MR2)
| Application | (1) Quantity |
|---|
| Cooling System (Includes Heater) | 11.0 Qts. (10.4L) |
| Crankcase (Includes Filter) (2) | 3.9 Qts. (3.7L) |
| Manual Transaxle (SAE 75W-90/API GL-5) |
| With Limited Slip Differential (LSD) | 1.9 Qts. (1.8L) |
| Without Limited Slip Differential (LSD) | 2.0 Qts. (1.9L) |
| Sequential Manual Transaxle Reservoir Fluid |
| 2001 Models (3) | (4) |
| Power Steering Fluid (Toyota Power Steering Fluid EH) | .63 Qt. (.60L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. (3) There are 2 types of manual transaxles used. A standard type manual transaxle and a sequential manual transaxle. A standard type manual transaxle is a common transaxle in which the driver operates the clutch and shifts the transaxle. A sequential manual transaxle is an electronic controlled manual transaxle in which the clutch is operated and transaxle is shifted hydraulically by moving the shift lever forward or backward. The sequential manual transaxle may be identified by the shift lever pattern and uses a special fluid in the fluid reservoir. Shift lever pattern consists of "R", "N", "S" and "+" in place of the conventional type shift lever pattern and no clutch pedal is used. (4) Capacity is not available from manufacturer. Use only Sequential M/T Fluid (08886-02206). |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
| (3) | There are 2 types of manual transaxles used. A standard type manual transaxle and a sequential manual transaxle. A standard type manual transaxle is a common transaxle in which the driver operates the clutch and shifts the transaxle. A sequential manual transaxle is an electronic controlled manual transaxle in which the clutch is operated and transaxle is shifted hydraulically by moving the shift lever forward or backward. The sequential manual transaxle may be identified by the shift lever pattern and uses a special fluid in the fluid reservoir. Shift lever pattern consists of "R", "N", "S" and "+" in place of the conventional type shift lever pattern and no clutch pedal is used. |
| (4) | Capacity is not available from manufacturer. Use only Sequential M/T Fluid (08886-02206). |
FLUID CAPACITIES (PRIUS)
| Application | (2) Quantity |
|---|
| Cooling System (Includes Heater) |
| Engine Cooling System (Includes Heater) | 5.2 Qts. (4.9L) |
| Inverter Cooling System (4) | 2.7 Qts. (2.6L) |
| Crankcase (Includes Filter) (3) | 3.9 Qts. (3.7L) |
| Power Steering Fluid | (5) |
| Transaxle Unit (Toyota Type "T-IV" ATF) | 4.9 Qts. (4.6L) |
| (1) Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . (2) Approximate quantity is listed. (3) Use an API SJ energy conserving engine oil. (4) This is the coolant used for cooling the inverter system. Coolant reservoir is located on top of engine, near inverter. (5) This vehicle does not use power steering fluid as an electric steering gear assembly is used. |
| (1) | Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
| (2) | Approximate quantity is listed. |
| (3) | Use an API SJ energy conserving engine oil. |
| (4) | This is the coolant used for cooling the inverter system. Coolant reservoir is located on top of engine, near inverter. |
| (5) | This vehicle does not use power steering fluid as an electric steering gear assembly is used. |
FLUID CAPACITIES (PRIUS) (1)
FLUID CAPACITIES (RAV4)
| Application | (1) Quantity |
|---|
| Automatic Transaxle (Toyota Type "T-IV" ATF) |
| 2WD |
| Drain & Refill | 3.5 Qts. (3.3L) |
| Dry Refill | 9.1 Qts. (8.6L) |
| 4WD |
| Drain & Refill | 4.1 Qts. (3.9L) |
| Dry Refill | 8.8 Qts. (8.3L) |
| Cooling System (Includes Heater) |
| A/T | 6.6 Qts. (6.2L) |
| M/T | 6.7 Qts. (6.3L) |
| Crankcase (Includes Filter) (2) | 4.4 Qts. (4.2L) |
| Differential (SAE 80W-90/API GL-5) |
| 4WD |
| Rear Axle | 1.0 Qt. (.9L) |
| Power Steering Fluid (Dexron-III) | .75 Qt. (.71L) |
| Transfer Case (SAE 90/API GL-5) | .95 Qt. (.90L) |
| Manual Transaxle (SAE 75W-90/API GL-5) |
| 2WD | 2.6 Qts. (2.5L) |
| 4WD | 3.6 Qts. (3.4L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
FLUID CAPACITIES (SEQUOIA)
| Application | (1) Quantity |
|---|
| Automatic Transmission (Dexron-III) |
| Drain & Refill | 2.1 Qts. (2.0L) |
| Dry Refill | 13.0 Qts. (12.3L) |
| Cooling System (Includes Heater) |
| With Front Heater Only | 12.4 Qts. (11.7L) |
| With Front & Rear Heater | 14.1 Qts. (13.4L) |
| Crankcase (Includes Filter) (2) | 6.6 Qts. (6.2L) |
| Differential |
| Front Axle (SAE 75W-90/API GL-5) | 1.2 Qts. (1.1L) |
| Rear Axle (SAE 80W-90/API GL-5) | 3.9 Qts. (3.7L) |
| Power Steering Fluid (Dexron-III) | .85 Qt. (.80L) |
| Transfer Case (SAE 75W-90/API GL-5) | 1.3 Qts. (1.2L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
FLUID CAPACITIES (SEQUOIA)
FLUID CAPACITIES (SIENNA)
| Application | (1) Quantity |
|---|
| Automatic Transaxle (Dexron-III) |
| Drain & Refill | 5.0 Qts. (4.7L) |
| Dry Fill | 8.5 Qts. (8.0L) |
| Cooling System (Includes Heater) |
| With Rear Heater | 11.0 Qts. (10.4L) |
| Without Rear Heater | 10.0 Qts. (9.5L) |
| Crankcase (Includes Filter) (2) | 5.0 Qts. (4.7L) |
| Power Steering Fluid (Dexron-III) | .85 Qt. (.80L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
FLUID CAPACITIES (SIENNA)
FLUID CAPACITIES (TACOMA)
| Application | (1) Quantity |
|---|
| Automatic Transmission (Dexron-III) |
| 2WD |
| PreRunner |
| 2.7L 4-Cyl. (3RZ-FE) & 3.4L V6 |
| Drain & Refill | 1.7 Qts. (1.6L) |
| Dry Refill | 7.6 Qts. (7.2L) |
| Except PreRunner |
| 2.4L 4-Cyl. (2RZ-FE) |
| Drain & Refill | 2.5 Qts. (2.4L) |
| Dry Refill | 6.9 Qts. (6.5L) |
| 3.4L V6 |
| Drain & Refill | 1.7 Qts. (1.6L) |
| Dry Refill | 7.6 Qts. (7.2L) |
| 4WD |
| Drain & Refill | 2.1 Qts. (2.0L) |
| Dry Refill | 10.7 Qts. (10.1L) |
| Cooling System (Includes Heater) |
| 2WD |
| PreRunner |
| A/T |
| 2.7L 4-Cyl. (3RZ-FE) | 8.7 Qts. (8.2L) |
| 3.4L V6 | 10.5 Qts. (10.0L) |
| M/T |
| 2.7L 4-Cyl. (3RZ-FE) | 8.8 Qts. (8.3L) |
| 3.4L V6 | 10.7 Qts. (10.1L) |
| Except PreRunner |
| A/T |
| 2.4L 4-Cyl. (2RZ-FE) | 8.2 Qts. (7.8L) |
| 3.4L V6 | 10.0 Qts. (9.5L) |
| M/T |
| 2.4L 4-Cyl. (2RZ-FE) | 8.5 Qts. (8.0L) |
| 3.4L V6 | 10.3 Qts. (9.7L) |
| 4WD |
| A/T |
| 2.7L 4-Cyl. (3RZ-FE) | 8.7 Qts. (8.2L) |
| 3.4L V6 | 10.5 Qts. (10.0L) |
| M/T |
| 2.7L 4-Cyl. (3RZ-FE) | 8.8 Qts. (8.3L) |
| 3.4L V6 | 10.7 Qts. (10.1L) |
| Crankcase (Includes Filter) (2) |
| 2WD |
| PreRunner |
| 2.7L 4-Cyl. (3RZ-FE) | 5.7 Qts. (5.4L) |
| 3.4L V6 | 5.5 Qts. (5.2L) |
| Except PreRunner |
| 2.4L 4-Cyl. (2RZ-FE) | 5.8 Qts. (5.5L) |
| 3.4L V6 | 5.7 Qts. (5.4L) |
| 4WD |
| 2.7L 4-Cyl. (3RZ-FE) | 5.7 Qts. (5.4L) |
| 3.4L V6 | 5.5 Qts. (5.2L) |
| Differential |
| 2WD (SAE 80W-90/API GL-5) |
| PreRunner |
| Short Wheel Base |
| With Rear Differential Lock System | 2.8 Qts. (2.7L) |
| Without Rear Differential Lock System | 2.7 Qts. (2.6L) |
| Long Wheel Base |
| With Rear Differential Lock System | 3.1 Qts. (2.9L) |
| Without Rear Differential Lock System | 2.6 Qts. (2.5L) |
| Except PreRunner |
| 2.4L 4-Cyl. (2RZ-FE) | 1.4 Qts. (1.3L) |
| 3.4L V6 | 2.7 Qts. (2.6L) |
| 4WD |
| Front Axle (SAE 75W-90/API GL-5) | 1.2 Qts. (1.1L) |
| Rear Axle (SAE 80W-90/APGL-5) |
| Short Wheel Base |
| With Rear Differential Lock System | 2.8 Qts. (2.7L) |
| Without Rear Differential Lock System | 2.7 Qts. (2.6L) |
| Long Wheel Base |
| With Rear Differential Lock System | 3.1 Qts. (2.9L) |
| Without Rear Differential Lock System | 2.6 Qts. (2.5L) |
| Manual Transmission (SAE 75W-90/API GL-5) |
| 2WD | 2.7 Qts. (2.6L) |
| 4WD |
| 2.7L 4-Cyl. (3RZ-FE) | 2.6 Qts. (2.5L) |
| 3.4L V6 | 2.3 Qts. (2.2L) |
| Power Steering Fluid (Dexron-III) | .85 Qt. (.80L) |
| Transfer Case (SAE 75W-90/API GL-5) | 1.1 Qts. (1.0L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
FLUID CAPACITIES (TACOMA)
FLUID CAPACITIES (TUNDRA)
| Application | (1) Quantity |
|---|
| Automatic Transmission (Dexron-III) |
| 3.4L V6 |
| Drain & Refill | 2.1 Qts. (2.0L) |
| Dry Refill | 10.7 Qts. (10.1L) |
| 4.7L V8 |
| Drain & Refill | 2.1 Qts. (2.0L) |
| Dry Refill | 13.0 Qts. (12.3L) |
| Cooling System (Includes Heater) |
| A/T |
| 3.4L V6 | 10.5 Qts. (10.0L) |
| 4.7L V8 | 12.3 Qts. (11.6L) |
| M/T | 10.5 Qts. (10.0L) |
| Crankcase (Includes Filter) (2) |
| 3.4L V6 | 5.5 Qts. (5.2L) |
| 4.7L V8 | 6.5 Qts. (6.2L) |
| Differential |
| 2WD (SAE 80W-90/API GL-5) | 4.0 Qts. (3.8L) |
| 4WD |
| Front Axle (SAE 75W-90/API GL-5) | 1.2 Qts. (1.1L) |
| Rear Axle (SAE 80W-90/APGL-5) | 3.7 Qts. (3.5L) |
| Manual Transmission (SAE 75W-90/API GL-5) |
| 2WD | 2.7 Qts. (2.6L) |
| 4WD | 2.3 Qts. (2.2L) |
| Power Steering Fluid (Dexron-III) | 1.1 Qt. (1.0L) |
| Transfer Case (SAE 75W-90/API GL-5) | 1.1 Qts. (1.0L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
FLUID CAPACITIES (TUNDRA)
FLUID CAPACITIES (4RUNNER)
| Application | (1) Quantity |
|---|
| Automatic Transmission (Dexron-III) |
| 2WD |
| Drain & Refill | 1.7 Qts. (1.6L) |
| Dry Refill | 7.6 Qts. (7.2L) |
| 4WD |
| Drain & Refill | 2.1 Qts. (2.0L) |
| Dry Refill | 10.8 Qts. (10.2L) |
| Cooling System (Includes Heater) |
| With Rear Heater | 9.5 Qts. (9.0L) |
| Without Rear Heater | 8.5 Qts. (8.0L) |
| Crankcase (Includes Filter) (2) | 5.5 Qts. (5.2L) |
| Differential |
| 2WD (SAE 80W-90/API GL-5) | 2.9 Qts. (2.8L) |
| 4WD |
| Front Axle |
| With Automatic Disconnecting Differential (SAE 75W-90/API GL-5) | 1.2 Qts. (1.1L) |
| Without Automatic Disconnecting Differential (SAE 80W-90/API GL-5) | 1.2 Qts. (1.1L) |
| Rear Axle (SAE 80W-90/API GL-5) |
| With Rear Differential Lock System | 2.9 Qts. (2.8L) |
| Without Rear Differential Lock System | 2.6 Qts. (2.5L) |
| Power Steering Fluid (Dexron-III) | .85 Qt. (.80L) |
| Transfer Case (SAE 75W-90/API GL-5) | 1.3 Qt. (1.2L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
FLUID CAPACITIES (4RUNNER)
ENGINE COMPRESSION SPECIFICATIONS (4-CYLINDER)
| Application | Specification |
|---|
| Normal Compression Pressure |
| Camry |
| CNG Models | 252 psi (17.7 kg/cm 2 ) |
| Gasoline Models | 178 psi (12.5 kg/cm 2 ) |
| Camry Solara | 178 psi (12.5 kg/cm 2 ) |
| Celica |
| 1.8L (1ZZ-FE) | 218 psi (15.3 kg/cm 2 ) |
| 1.8L (2ZZ-GE) | 203 psi (14.3 kg/cm 2 ) |
| Corolla | 218 psi (15.3 kg/cm 2 ) |
| ECHO | 213 psi (15.0 kg/cm 2 ) |
| Highlander | 198 psi (13.9 kg/cm 2 ) |
| MR2 | 184 psi (13.0 kg/cm 2 ) |
| Prius (2) | 106 psi (7.4 kg/cm 2 ) |
| RAV4 | 184 psi (13.0 kg/cm 2 ) |
| Tacoma | 178 psi (12.5 kg/cm 2 ) |
| Minimum Compression Pressure |
| Camry |
| CNG Models | 202 psi (14.2 kg/cm 2 ) |
| Gasoline Models | 142 psi (10.0 kg/cm 2 ) |
| Camry Solara | 142 psi (10.0 kg/cm 2 ) |
| Celica |
| 1.8L (1ZZ-FE) & 1.8L (2ZZ-GE) | 145 psi (10.2 kg/cm 2 ) |
| Corolla | 145 psi (10.2 kg/cm 2 ) |
| ECHO | 156 psi (11.0 kg/cm 2 ) |
| Highlander | 142 psi (10.0 kg/cm 2 ) |
| MR2 | 145 psi (10.2 kg/cm 2 ) |
| Prius | 77 psi (5.4 kg/cm 2 ) |
| RAV4 | 145 psi (10.2 kg/cm 2 ) |
| Tacoma | 128 psi (9.0 kg/cm 2 ) |
| Maximum Variation Between Cylinders |
| Camry & Camry Solara (1) | 14 psi (1.0 kg/cm 2 ) |
| Celica |
| 1.8L (1ZZ-FE) | 14 psi (1.0 kg/cm 2 ) |
| 1.8L (2ZZ-GE) | 16 psi (1.1 kg/cm 2 ) |
| Corolla, ECHO, Highlander, MR2, Prius, RAV4 & Tacoma | 14 psi (1.0 kg/cm 2 ) |
| (1) On Camry models, specification applies to both gasoline and Compressed Natural Gas (CNG) models. (2) Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
| (1) | On Camry models, specification applies to both gasoline and Compressed Natural Gas (CNG) models. |
| (2) | Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
ENGINE COMPRESSION SPECIFICATIONS (4-CYLINDER)
ENGINE COMPRESSION SPECIFICATIONS (V6)
| Application | Specification |
|---|
| Normal Compression Pressure |
| Avalon, Camry & Camry Solara | 218 psi (15.3 kg/cm 2 ) |
| Highlander | 213 psi (15.0 kg/cm 2 ) |
| Sienna | 218 psi (15.3 kg/cm 2 ) |
| Tacoma, Tundra & 4Runner | 174 psi (12.2 kg/cm 2 ) |
| Minimum Compression Pressure |
| Avalon, Camry & Camry Solara | 145 psi (10.2 kg/cm 2 ) |
| Highlander | 142 psi (10.0 kg/cm 2 ) |
| Sienna, Tacoma, Tundra & 4Runner | 145 psi (10.2 kg/cm 2 ) |
| Maximum Variation Between Cylinders |
| All Models | 14 psi (1.0 kg/cm 2 ) |
ENGINE COMPRESSION SPECIFICATIONS (V6)
ENGINE COMPRESSION SPECIFICATIONS (V8)
| Application | Specification |
|---|
| Normal Compression Pressure |
| Land Cruiser, Sequoia & Tundra | 192 psi (13.5 kg/cm 2 ) |
| Minimum Compression Pressure |
| Land Cruiser, Sequoia & Tundra | 142 psi (10.0 kg/cm 2 ) |
| Maximum Variation Between Cylinders |
| Land Cruiser, Sequoia & Tundra | 14 psi (1.0 kg/cm 2 ) |
ENGINE COMPRESSION SPECIFICATIONS (V8)
VALVE CLEARANCE SPECIFICATIONS (4-CYLINDER)
| Application | In. (mm) |
|---|
| Camry & Camry Solara |
| Intake | .007-.011 (.19-.29) |
| Exhaust | .011-.015 (.29-.38) |
| Celica |
| 1.8L (1ZZ-FE) |
| Intake | .006-.010 (.15-.25) |
| Exhaust | .010-.014 (.25-.35) |
| 1.8L (2ZZ-GE) |
| Intake | .004-.006 (.10-.15) |
| Exhaust | .009-.012 (.23-.30) |
| Corolla & ECHO |
| Intake | .006-.010 (.15-.25) |
| Exhaust | .010-.014 (.25-.35) |
| Highlander |
| Intake | .007-.011 (.19-.29) |
| Exhaust | .012-.016 (.30-.40) |
| MR2 |
| Intake | .006-.010 (.15-.25) |
| Exhaust | .010-.014 (.25-.35) |
| Prius (2) |
| Intake | .006-.009 (.15-.23) |
| Exhaust | .011-.013 (.29-.33) |
| RAV4 |
| Intake | .007-.011 (.19-.29) |
| Exhaust | .012-.016 (.30-.40) |
| Tacoma |
| Intake | .006-.010 (.15-.25) |
| Exhaust | .010-.014 (.25-.35) |
| (1) Adjust valve clearance with engine cold. (2) Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
| (1) | Adjust valve clearance with engine cold. |
| (2) | Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
VALVE CLEARANCE SPECIFICATIONS (4-CYLINDER) (1)
VALVE CLEARANCE SPECIFICATIONS (V6)
| Application | In. (mm) |
|---|
| Avalon, Camry, Camry Solara, Highlander & Sienna |
| Intake | .006-.010 (.15-.25) |
| Exhaust | .010-.014 (.25-.35) |
| Tacoma, Tundra & 4Runner |
| Intake | .006-.009 (.15-.23) |
| Exhaust | .011-.014 (.29-.35) |
| (1) Adjust valve clearance with engine cold. |
| (1) | Adjust valve clearance with engine cold. |
VALVE CLEARANCE SPECIFICATIONS (V6) (1)
VALVE CLEARANCE SPECIFICATIONS (V8)
| Application | In. (mm) |
|---|
| Land Cruiser, Sequoia & Tundra |
| Intake | .006-.010 (.15-.25) |
| Exhaust | .010-.014 (.25-.35) |
| (1) Adjust valve clearance with engine cold. |
| (1) | Adjust valve clearance with engine cold. |
VALVE CLEARANCE SPECIFICATIONS (V8) (1)
SPARK PLUG SPECIFICATIONS (4-CYLINDER)
| Application | Gap In. (mm) | Torque Ft. Lbs. (N.m) |
|---|
| Camry CNG & Gasoline Models, Camry Solara, Celica, Corolla & ECHO | .043 (1.10) | 13 (18) |
| Highlander | .043 (1.10) | 14 (19) |
| MR2 | .043 (1.10) | 19 (26) |
| Prius (1) | .043 (1.10) | 13 (18) |
| RAV4 | .043 (1.10) | 14 (19) |
| Tacoma | .043 (1.10) | 15 (20) |
| (1) Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
| (1) | Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
SPARK PLUG SPECIFICATIONS (4-CYLINDER)
SPARK PLUG SPECIFICATIONS (V6)
| Application | Gap In. (mm) | Torque Ft. Lbs. (N.m) |
|---|
| Avalon, Camry, Camry Solara, Highlander, Sienna, Tacoma, Tundra & 4Runner | .043 (1.10) | 13 (18) |
SPARK PLUG SPECIFICATIONS (V6)
SPARK PLUG SPECIFICATIONS (V8)
| Application | Gap In. (mm) | Torque Ft. Lbs. (N.m) |
|---|
| Land Cruiser | .043 (1.10) | 13 (18) |
| Sequoia & Tundra | .031 (.80) | 13 (18) |
SPARK PLUG SPECIFICATIONS (V8)
IDLE SPEED SPECIFICATIONS (4-CYLINDER)
| Application | RPM |
|---|
| Camry CNG & Gasoline Models, & Camry Solara | 650-750 |
| Celica |
| 1.8L (1ZZ-FE) |
| A/T | 700-800 |
| M/T | 650-750 |
| 1.8L (2ZZ-GE) |
| A/T | 700-800 |
| M/T | 750-850 |
| Corolla | 650-750 |
| ECHO |
| A/T | 650-750 |
| M/T | 600-700 |
| Highlander | 600-700 |
| MR2 | 650-750 |
| Prius (2) | 950-1050 |
| RAV4 & Tacoma | 650-750 |
| (1) Check with engine at normal operating temperature, transaxle/transmission in Neutral (except Prius, in Park on Prius), parking brake applied, air cleaner and all air intake hoses installed, all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, electric cooling fan off (if equipped), and A/C and all accessories off. (2) Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . Check with transit in inspection mode and transaxle in Park. |
| (1) | Check with engine at normal operating temperature, transaxle/transmission in Neutral (except Prius, in Park on Prius), parking brake applied, air cleaner and all air intake hoses installed, all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, electric cooling fan off (if equipped), and A/C and all accessories off. |
| (2) | Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . Check with transit in inspection mode and transaxle in Park. |
IDLE SPEED SPECIFICATIONS (4-CYLINDER) (1)
IDLE SPEED SPECIFICATIONS (V6)
| Application | RPM |
|---|
| Avalon | 600-700 |
| Camry, Camry Solara, Highlander, Sienna, Tacoma, Tundra & 4Runner | 650-750 |
| (1) Check with engine at normal operating temperature, transaxle/transmission in Neutral, parking brake applied, air cleaner and all air intake hoses installed, all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, and A/C and all accessories off. |
| (1) | Check with engine at normal operating temperature, transaxle/transmission in Neutral, parking brake applied, air cleaner and all air intake hoses installed, all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, and A/C and all accessories off. |
IDLE SPEED SPECIFICATIONS (V6) (1)
IDLE SPEED SPECIFICATIONS (V8)
| Application | RPM |
|---|
| Land Cruiser, Sequoia & Tundra | 650-750 |
| (1) Check with engine at normal operating temperature, transmission in Neutral, parking brake applied, air cleaner and all air intake hoses installed, all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, and A/C and all accessories off. |
| (1) | Check with engine at normal operating temperature, transmission in Neutral, parking brake applied, air cleaner and all air intake hoses installed, all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, and A/C and all accessories off. |
IDLE SPEED SPECIFICATIONS (V8) (1)
DASHPOT SPECIFICATIONS
| Application | RPM |
|---|
| Tacoma 3.4L V6 M/T | 1800-2200 |
| (1) Check with engine at normal operating temperature. |
| (1) | Check with engine at normal operating temperature. |
DASHPOT SPECIFICATIONS (1)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (AVALON)
| Application | Throttle Position | Terminals | Ohms |
|---|
| 3.0L | Fully Closed | VTA & E2 | 200-6300 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| (1) Apply vacuum to throttle opener before checking TP sensor. |
| (1) | Apply vacuum to throttle opener before checking TP sensor. |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (AVALON) (1)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (CAMRY & CAMRY SOLARA)
| Application | Throttle Position | Terminals | Ohms |
|---|
| 2.2L 4-Cyl. (2) | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| 3.0L V6 | Fully Closed | VTA & E2 | 200-6300 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| (1) Apply vacuum to throttle opener before checking TP sensor. (2) On Camry models, specification applies to both gasoline and Compressed Natural Gas (CNG) models. |
| (1) | Apply vacuum to throttle opener before checking TP sensor. |
| (2) | On Camry models, specification applies to both gasoline and Compressed Natural Gas (CNG) models. |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (CAMRY & CAMRY SOLARA) (1)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (CELICA & COROLLA)
| Application | Throttle Position | Terminals | Ohms |
|---|
| 1.8L | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (CELICA & COROLLA)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (ECHO)
| Application | Throttle Position | Terminals | Ohms |
|---|
| 1.5L | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (ECHO)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (HIGHLANDER)
| Application | Throttle Position | Terminals | Ohms |
|---|
| 2.4L 4-Cyl. | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5000 |
| 3.0L V6 | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5000 |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (HIGHLANDER)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (LAND CRUISER)
| Application | Terminals | Ohms |
|---|
| 4.7L | VC & E2 | (1) 1250-2350 |
| (1) Resistance at 68°F (20°C). |
| (1) | Resistance at 68°F (20°C). |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (LAND CRUISER)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (MR2)
| Application | Throttle Position | Terminals | Ohms |
|---|
| 1.8L 4-Cyl. |
| 2000 Models | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| 2001Models (1) |
| With Standard Type Manual Transaxle | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| Models With Sequential Manual Transaxle | — | VC & E2 | (2) 1200-3200 |
| (1) There are 2 types of manual transaxles used. A standard type manual transaxle and a sequential manual transaxle. A standard type manual transaxle is a common transaxle in which the driver operates the clutch and shifts the transaxle. A sequential manual transaxle is an electronic controlled manual transaxle in which the clutch is operated and transaxle is shifted hydraulically by moving the shift lever forward or backward and uses a special fluid in the fluid reservoir. The sequential manual transaxle may be identified by the shift lever pattern which consists of "R", "N", "S" and "+" in place of the conventional type shift lever pattern and no clutch pedal is used. (2) Resistance at 68°F (20°C). |
| (1) | There are 2 types of manual transaxles used. A standard type manual transaxle and a sequential manual transaxle. A standard type manual transaxle is a common transaxle in which the driver operates the clutch and shifts the transaxle. A sequential manual transaxle is an electronic controlled manual transaxle in which the clutch is operated and transaxle is shifted hydraulically by moving the shift lever forward or backward and uses a special fluid in the fluid reservoir. The sequential manual transaxle may be identified by the shift lever pattern which consists of "R", "N", "S" and "+" in place of the conventional type shift lever pattern and no clutch pedal is used. |
| (2) | Resistance at 68°F (20°C). |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (MR2)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (PRIUS)
| Application | Terminals | Ohms |
|---|
| 1.5L | VC & E2 | (2) 1200-3200 |
| (1) Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . (2) Resistance at 68°F (20°C). |
| (1) | Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
| (2) | Resistance at 68°F (20°C). |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (PRIUS) (1)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (RAV4)
| Application | Throttle Position | Terminals | Ohms |
|---|
| 2.0L | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (RAV4)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (SEQUOIA)
| Application | Terminals | Ohms |
|---|
| 4.7L | VC & E2 | (1) 1250-2350 |
| (1) Resistance at 68°F (20°C). |
| (1) | Resistance at 68°F (20°C). |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (SEQUOIA)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (SIENNA)
| Application | Throttle Position | Terminals | Ohms |
|---|
| 3.0L | Fully Closed | VTA & E2 | 200-6300 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| (1) Apply vacuum to throttle opener before checking TP sensor. |
| (1) | Apply vacuum to throttle opener before checking TP sensor. |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (SIENNA) (1)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (TACOMA)
| Application | Throttle Position | Terminals | Ohms |
|---|
| 2.4L 4-Cyl. & 2.7L 4-Cyl. | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| 3.4L V6 | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| (1) Apply vacuum to throttle opener before checking TP sensor. |
| (1) | Apply vacuum to throttle opener before checking TP sensor. |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (TACOMA) (1)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (TUNDRA)
| Application | Throttle Position | Terminals | Ohms |
|---|
| 3.4L V6 (1) | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| 4.7L V8 | — | VC & E2 | (2) 1250-2350 |
| (1) Apply vacuum to throttle opener before checking TP sensor. (2) Resistance at 68°F (20°C). |
| (1) | Apply vacuum to throttle opener before checking TP sensor. |
| (2) | Resistance at 68°F (20°C). |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (TUNDRA)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (4RUNNER)
| Application | Terminals | Ohms |
|---|
| 3.4L | VC & E2 | (1) 1200-3200 |
| (1) Resistance at 68°F (20°C). |
| (1) | Resistance at 68°F (20°C). |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (4RUNNER)
