REMOVAL & INSTALLATION
| WARNING | Vehicle is equipped with air bag supplement restraint system. Before attempting ANY repairs involving steering column, instrument panel or related components, see SERVICE PRECAUTIONS and DISABLING & ACTIVATING AIR BAG SYSTEM in appropriate AIR BAG RESTRAINT systems article. |
| CAUTION | When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. |
Manufacturer lists headlight control switch servicing with steering wheel and spiral cable removed. Remove necessary steering column covers for access to headlight control switch. (Scheme 3) Disconnect electrical connector from headlight control switch. Push on claw and remove headlight control switch. (Scheme 3) To install, reverse removal procedure. Ensure claw is fully latched.
Scheme 3
Ignition switch is located at bottom of upper steering column bracket. see scheme 1 It may be necessary to remove steering column for access to ignition switch. See STEERING COLUMNS article in STEERING. Remove screws and ignition switch. To install, reverse removal procedure.
Key unlock warning switch is located on upper steering column bracket, near ignition lock cylinder. see scheme 1 Key unlock warning switch may also be referred to as unlock switch or unlock warning switch. It may be necessary to remove steering column for access to key unlock warning switch. See STEERING COLUMNS article in the STEERING. Slide key unlock warning switch from upper steering column bracket. To install, reverse removal procedure.
Passenger's side Junction Block (J/B) Electronic Control Unit (ECU) is located at passenger's side of instrument panel. see scheme 2 Service information is not available from manufacturer.