SERVICE DATA
| Spark plug | ||
|---|---|---|
| Spark plug type | DENSO made | SC20HR11 |
| Standard electrode gap | For new spark plug | 1.0 to 1.1 mm (0.0394 to 0.0433 in.) |
| Maximum electrode gap | For used spark plug | 1.3 mm (0.0512 in.) |
| Camshaft timing oil control valve assembly | ||
| Resistance | 1 - 2 | 6.9 to 7.9 ohms at 20°C (68°F) |
| Throttle body assembly | ||
| Resistance | 1 (M-) - 2 (M+) | 0.3 to 100 ohms at 20°C (68°F) |
| Mass air flow meter | ||
| Resistance | 1(THA) - 2(E2) | 13.6 to 18.4 kohms at -20°C (-4°F) |
| 1(THA) - 2(E2) | 2.21 to 2.69 kohms at 20°C (68°F) | |
| 1(THA) - 2(E2) | 0.49 to 0.67 kohms at 60°C (140°F) | |
| Crankshaft position sensor | ||
| Resistance | 10 to 50°C (14 to 122°F) | 1630 to 2740ohms |
| 50 to 100°C (122 to 212°F) | 2065 to 3225 ohms | |
| Engine coolant temperature sensor | ||
| Resistance | 20°C (68°F) | 2.32 to 2.59 kohms |
| 80°C (176°F) | 0.310 to 0.326 kohms | |
| Knock sensor | ||
| Resistance | At 20°C (68°F) | 120 to 280 kohms |
| Air fuel ratio sensor | ||
| Resistance | 1 (HA1A) - 2 (+B) | 1.6 to 3.2 ohms at 20°C (68°F) |
| 1 (HA1A) - 4 (A1A-) | 10 kohms or higher | |
| Heated oxygen sensor | ||
| Resistance | 1 (HT1B) - 2 (+B) | 11 to 16 ohms at 20°C (68°F) |
| 1 (HT1B) - 4 (E2) | 10 kohms or higher | |
| IG2 relay | ||
| Specified condition | (1C-1) - (1A-4) | 10 kohms or higher |
| (1C-1) - (1A-4) | Below 1 ohms (when auxiliary battery voltage is applied across terminals 1A-3 and 1A-2) | |
| BATT FAN relay | ||
| Specified condition | (1C-1) - (1A-8) | 10 kohms or higher |
| (1C-1) - (1A-8) | Below 1 ohms (when auxiliary battery voltage is applied across terminals 1A-7 and 1A-6) | |
| EFI MAIN relay | ||
| Specified condition | (1C-1) - (1B-4) | 10 kohms or higher |
| (1C-1) - (1B-4) | Below 1 ohms (when auxiliary battery voltage is applied across terminals 1B-2 and 1B-3) | |
| C/OPN relay | ||
| Specified condition | (1B-5) - (1B-8) | 10 kohms or higher |
| (1B-5) - (1B-8) | Below 1 ohms (when auxiliary battery voltage is applied across terminals 1B-6 and 1B-7) | |
TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Camshaft timing oil control valve assembly x Cylinder head cover sub-assembly | 10 | 102 | 7 | |
| Throttle body assembly x Intake manifold | 10 | 102 | 7 | |
| Air cleaner case x Intake manifold | 7.0 | 71 | 62 in.*lbf | |
| Inlet air cleaner assembly x Intake manifold | 7.0 | 71 | 62 in.*lbf | |
| Inlet air cleaner assembly x Body | 7.0 | 71 | 62 in.*lbf | |
| Inlet air cleaner assembly x Engine mounting insulator RH | 7.0 | 71 | 62 in.*lbf | |
| ECM bracket x Body | 13 | 133 | 10 | |
| No. 2 engine room wire x Engine room relay block and junction block assembly | 8.3 | 85 | 73 in.*lbf | |
| Inverter reserve tank assembly x Bracket | 10 | 102 | 7 | |
| No. 1 crank position sensor x Cylinder head cover sub-assembly | 10 | 102 | 7 | |
| Crank position sensor x Cylinder block sub-assembly | 10 | 102 | 7 | |
| Spark plug assembly x Cylinder head sub-assembly | 20 | 204 | 15 | |
| Ignition coil assembly x Cylinder head cover | 10 | 102 | 7 | |
| Engine coolant temperature sensor x Cylinder head sub-assembly | Without SST | 20 | 200 | 14 |
| With SST | 17 | 175 | 13 | |
| Knock control sensor x Cylinder block sub-assembly | 20 | 204 | 15 | |
| Wire harness clamp bracket x Front suspension crossmember sub-assembly | 13 | 127 | 9 | |
| Air fuel ratio sensor x Exhaust manifold | Without SST | 44 | 449 | 32 |
| With SST | 40 | 408 | 30 | |
| Heated Oxygen sensor x Exhaust pipe | Without SST | 44 | 449 | 32 |
| With SST | 40 | 408 | 30 | |