Home/Toyota/Prius Plug-in/Toyota Prius Plug-in (2012-2014)/Repair manual/Engine Control Systems/Hybrid / Battery Control System (Service Specifications) (B…
Contents Wiring diagrams Section: Engine Control Systems All sections

Hybrid / Battery Control System (Service Specifications) (Base): Other Toyota Prius Plug-in

SERVICE DATA

ItemSpecified Condition
Standard value (for brand-new cap)94 to 122 kPa (1.0 to 1.2 kgf/cm 2 , 13.6 to 17.7 psi)
Minimum standard value (for used cap)94 kPa (1.0 kgf/cm 2 , 13.6 psi)

RESERVE TANK CAP (FOR INVERTER)

ItemTester ConnectionSpecified Condition
No. 1 circuit breaker sensor1 (SIF-) - 2 (SIF+)0.65 to 1.0 kohms at 20°C (68°F)
IGCT relay Resistance3 - 510 kohms or higher (When battery voltage is not applied between terminals 1 and 2)
3 - 5Below 1 ohms (When battery voltage is applied between terminals 1 and 2)

RELAY

SMRB Resistance4 (SMRB) - 2 (GND)19.0 to 35.5 ohms (at -40°C (-40°F) to 80°C (176°F)
SMRG Resistance1 (SMRG) - 2 (GND)19.0 to 35.5 ohms (at -40°C (-40°F) to 80°C (176°F)
SMRP Resistance3 (SMRP) - 2 (GND)112 to 274 ohms (at -40°C (-40°F) to 80°C (176°F)
Precharge resistor28.5 to 31.5 ohms
Electric vehicle fuseBelow 1 ohms

HYBRID BATTERY JUNCTION BLOCK

Service plug gripBelow 1 ohms

SERVICE PLUG GRIP