Home/Toyota/Prius PHV/Toyota Prius PHV pre-III (2010-2011)/Repair manual/Lubrication System/Engine Lubrication System (service Specifications) (except …
Contents Section: Lubrication System All sections

Engine Lubrication System (service Specifications) (except Phv) Toyota Prius PHV pre-III

SERVICE DATA

Oil pressureAt idle speed: 60 kPa (0.6 kgf/cm 2 , 8.7 psi) or more at 2500 RPM: 142 kPa (1.4 kgf/cm 2 , 21 psi)
Oil pressure switchTester Connection 1 - Switch bodyIdling: 10 kohms or higher Engine stopped: Below 1 ohms
Oil pumpStandard tip clearance: 0.08 to 0.16 mm (0.00315 to 0.00631 in.) Maximum tip clearance: 0.35 mm (0.0138 in.) Standard side clearance: 0.085 to 0.135 mm (0.00335 to 0.00532 in.) Maximum side clearance: 0.16 mm (0.00631 in.) Standard body clearance: 0.12 to 0.19 mm (0.00472 to 0.00750 in.) Maximum body clearance: 0.325 mm (0.0128 in.)

TORQUE SPECIFICATIONS

Part TightenedN*mKgf*cmFt.*lbf
Oil pressure switch x Oil pan1515311
Oil filter cap x Oil pan2525518
Oil pan drain plug x No. 2 oil pan3737727
Oil pump assembly x Cylinder block2121416
No. 2 oil pan X Oil pan101027
Chain tensioner plate X Cylinder block101027
Crankshaft pulley X Crankshaft2828621
Timing chain cover x Cylinder block, Cylinder head, Oil panBolt A, E, F2626019
Bolt B, C5152038
Bolt D101027