TORQUE SPECIFICATION
| Part tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| Filler and drain plugs | 39 | 400 | 29 | |
| Engine hood x Body | 20 | 204 | 15 | |
| Suspension upper brace x Body | Bolt | 74 | 755 | 55 |
| Nut | 80 | 816 | 59 | |
| Battery bracket x Body | 24 | 245 | 18 | |
| Left engine mounting bracket | Through bolt and nut | 87 | 887 | 64 |
| Bolt | 52 | 530 | 38 | |
| Control cable bracket x Transaxle | 25 | 255 | 18 | |
| Engine wire x Transaxle | 8 | 82 | 71 in..lbf | |
| Transaxle x Engine (From transaxle side) | 64 | 650 | 47 | |
| Clutch release cylinder x Transaxle | 12 | 120 | 9 | |
| Front engine mounting bracket | Through bolt and nut | 93 | 949 | 69 |
| Bolt | 78 | 796 | 56 | |
| Front engine mounting insulator x Body | 54 | 551 | 40 | |
| Starter x Transaxle | 37 | 378 | 28 | |
| Rear engine mounting insulator | Through bolt and nut | 93 | 949 | 69 |
| Bolt | 89 | 908 | 66 | |
| Rear engine mounting bracket x Transaxle | 78 | 796 | 58 | |
| Transaxle x Engine (From engine side) | Bolt A | 47 | 480 | 35 |
| Bolt B | 23 | 230 | 17 | |
| Grand cable x Transaxle | 19 | 194 | 14 | |
| No. 1 engine hangers set bolt | 38 | 387 | 28 | |
| Axle carrier x Shock absorber | 173 | 1,765 | 128 | |
| Axle hub x Drive shaft | 216 | 2,200 | 159 | |
| Strut rod x Axle carrier | 78 | 796 | 58 | |
| No. 1 lower suspension arm x Axle carrier | 103 | 1,051 | 76 | |
| No. 2 lower suspension arm x Axle carrier | 49 | 500 | 36 | |
| Drive shaft center bearing case lock bolt | 64 | 650 | 47 | |
| Back-up light switch | 40 | 410 | 30 | |
| Control shaft assembly | 12 | 122 | 9 | |
| Selecting bellcrank assembly x Transaxle case | 20 | 204 | 15 | |
| Shifting bellcrank assembly x Transmission case | 20 | 204 | 15 | |
| Lever lock pin set nut | 12 | 122 | 9 | |
| Transmission case x Transmission case cover | 18 | 185 | 13 | |
| Lock ball assembly (Shift and select lever shaft side) | 29 | 300 | 22 | |
| Control shaft cover x Transmission case | 20 | 200 | 14 | |
| 5th driven gear lock nut | 118 | 1,200 | 87 | |
| No. 1, No.2 and No.3 gear shift fork set bolt | 16 | 160 | 12 | |
| Rear bearing retainer x Transmission case | 27 | 280 | 20 | |
| Reverse idler gear shaft lock bolt | 29 | 300 | 22 | |
| Straight screw plug | 25 | 250 | 18 | |
| Lock ball assembly (Reverse shift fork side) | 39 | 400 | 29 | |
| Transmission case x Transaxle case | 29 | 300 | 22 | |
| Oil receiver pipe set bolt | 17 | 175 | 13 | |
| Reverse shift arm bracket x Transaxle case | 17 | 175 | 13 | |
| No. 1 gear shift head set bolt | 16 | 160 | 12 | |
| Output shaft front bearing lock plate set bolt | 11 | 115 | 8 | |
| Transaxle case receiver x Transaxle case | 11 | 115 | 8 | |
| Straight screw plug (Reverse restrict pin) | 13 | 130 | 9 | |
| Differential case x Ring gear | W/o LSD | 77 | 790 | 57 |
| W/LSD | 101 | 1,030 | 74 | |
| Shift and select control cable x Body | 4.9 | 50 | 43 in..lbf | |
| Shift lever assembly x Body | 12 | 50 | 43 | |
Torque Specification