CUSTOMIZE PARAMETERS
HINT
The following items can be customized.
Note. When the customer requests a change in a function, first make sure that the function can be customized. Be sure to make a note of the current settings before customizing. When troubleshooting a function, first make sure that the function is set to the default setting.
| Display | Default | Content | Setting |
|---|---|---|---|
| Lighting Time | 15 s | Changes the lighting time of the personal light*1, center room light and rear room light after closing all of the doors. (It will quickly fade out in case of turning the ignition switch to ON) | 7.5 s / 15 s / 30 s |
| I/L when ACC OFF | ON | Lights up the personal*1, center room light and rear room light when the ignition switch is turned from ACC or ON to off. | ON / OFF |
| I/L ON W/Door Key Unlock*2 | ON | Lights up the personal light*1, center room light and rear room light when the doors are unlocked using mechanical key or door control transmitter. | ON / OFF |
ILLUMINATED ENTRY
HINT
*1: w/ Sliding Roof
*2: w/ Power Door Lock Control System
PROCEDURE
- READ VALUE USING TECHSTREAM Connect the Techstream to the DLC3. Turn the ignition switch to ON. Turn the Techstream on. Enter the following menus: Body Electrical / Main Body / Data List. Read the display on the Techstream. MAIN BODY (MAIN BODY ECU) Tester Display Measurement Item/Range Normal Condition Diagnostic Note D-Door Lock Pos SW Driver side door lock position switch signal/ON or OFF ON: Driver side door unlocked OFF: Driver side door locked - P-Door Lock Pos SW Front passenger side door lock position switch signal/ON or OFF ON: Front passenger side door unlocked OFF: Front passenger side locked - OK Normal conditions listed above are displayed. NG --> See step 3 OK --> See step 2
- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN «PROBLEM SYMPTOMS TABLE»(ref-427550-S40003482832011101200000)
- GO TO POWER DOOR LOCK CONTROL SYSTEM. Refer to «PROBLEM SYMPTOMS TABLE»(ref-427553-S23167503892011101200000)