2GR-FE Engine Starting System: Removal & Installation Toyota Avalon XX30 рестайлинг

INSTALLATION

1. INSTALL ENGINE SWITCH Install the engine switch. Connect the engine switch connector.
2. INSTALL INSTRUMENT PANEL AIR BAG ASSEMBLY LOWER NO.1
3. INSTALL INSTRUMENT PANEL FINISH LOWER PANEL LH
4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
5. INSTALL FRONT DOOR SCUFF PLATE LH
6. CONNECT BATTERY NEGATIVE TERMINAL
7. INSPECT SRS WARNING LIGHT HINT: See «DIAGNOSIS SYSTEM»(ref-291134-S17734862942008072400000)
8. PERFORM INITIALIZATION HINT: See «INITIALIZATION»(ref-291101-S25902095052008072400000) Some systems need initialization when disconnecting the battery terminal.

Scheme 104

1. INSPECT IGNITION OR STATER SWITCH ASSEMBLY Measure the switch resistance. Resistance TESTER CONNECTION SPECIFIED CONDITION CHART Switch Condition Tester Connection Specified Condition LOCK - 10 kohms or higher ACC 1 (ST1) - 3 (ACC) Below 1 ohms ON 1 (ST1)- 2 (AM1) 1 (ST1) - 3 (ACC) 5 (IG2) - 6 (AM2) Below 1 ohms START 1 (ST1) - 2 (AM1) 4 (IG1) - 5 (IG2) 5 (IG2) - 6 (AM2) Below 1 ohms If the result is not as specified, replace the ignition or starter switch assembly.