CUSTOMIZE PARAMETERS
- CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE) HINT: The following items can be customized. NOTE: When the customer requests a change in a function, first make sure that the function can be customized. Record the current settings before customizing. Connect the Techstream to the DLC3. Turn the ignition switch to ON. Turn the Techstream on. Enter the following menus: Customize Setting. Select the setting by referring to the table below. AIR CONDITIONER Display Default Contents Setting Relevant ECU Set Temperature Shift Normal Function to set the temperature shift. +2 C, +1 C, Normal, -1 C or -2 C Air conditioning amplifier assembly Compressor Mode Automatic Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off. Automatic or Manual Air conditioning amplifier assembly Air Inlet Mode Automatic Function to automatically change to recirculation mode when the A/C is turned on. Automatic or Manual Air conditioning amplifier assembly Foot/DEF Auto Mode ON Function to turn on the airflow from the front and rear footwell register ducts and front defroster automatically when auto mode is on. ON or OFF Air conditioning amplifier assembly Foot/DEF Automatic Blow Up Function ON Function to change the blower level automatically when the front defroster is on. ON or OFF Air conditioning amplifier assembly Button Press Buzzer ON Function to sound a buzzer when a button is pressed. ON or OFF Air conditioning amplifier assembly Add Foot Air in FACE Mode ON When the FACE mode is selected, an additional amount of air is blown to the foot area. ON or OFF Air conditioning amplifier assembly