Contents Wiring diagrams Section: Removal & Installation All sections

Sienna Toyota 4Runner IV

ApplicationFt. Lbs. (N.m)
A/F Sensor32 (43)
Air Intake Chamber Bolt/Nut32 (43)
Control Lever Nut11 (15)
Coolant Housing Bolt/Nut11 (15)
ECT Sensor15 (20)
Engine Hanger Bolt29 (39)
Engine Mount Support Brace Bolt23 (31)
Fuel Line-To-Intake Manifold Clamp Bolt15 (20)
Fuel Tank Strap Bolt29 (39)
Heated Oxygen Sensor32 (43)
Hood Bolt19 (26)
Intake Manifold Bolt/Nut(1) 11 (15)
Knock Sensor29 (39)
No. 1 Intake Air Control Valve-To-Air Intake Chamber Nut22 (30)
No. 2 Intake Air Control Valve Nut11 (15)
Power Steering Pressure Switch15 (20)
Shift Control Cable Nut15 (20)
Throttle Body Bracket Bolt15 (20)
Windshield Wiper Arm Nut15 (20)
INCH Lbs. (N.m)
Camshaft Position Sensor Bolt71 (8)
Crankshaft Position Sensor Bolt71 (8)
Fuel Pump Retaining Plate-To-Fuel Tank Bolt35 (4)
Fuel Rail-To-Intake Manifold Bolt89 (10)
Fuel Tank Drain Plug106 (12)
IAC Valve Bolt(2)
Ignition Coil Bolt71 (8)
PNP Switch Retaining Bolt44 (5)
PNP Switch Retaining Nut62 (7)
Throttle Body-To-No. 1 Intake Air Control Valve Bolt62 (7)
TP Sensor Retaining Screw(2)
VVT Camshaft Timing Oil Control Valve Retaining Bolt71 (8)
(1) Tighten bolts/nuts to specification in sequence. (Схема №26) (2) Information is not available from manufacturer.
(1)Tighten bolts/nuts to specification in sequence. (Схема №26)
(2)Information is not available from manufacturer.

TORQUE SPECIFICATIONS (SIENNA)